SSN40-1GVAR-056C22 LENZE

SSN40-1GVAR-056C22 LENZE Interface Module

Product  Description：

Lenze interface modules are specialized communication and expansion components designed to integrate Lenze frequency inverters, servo drives, and controllers into broader industrial automation networks. These modules act as specialized translators, converting proprietary internal drive data into open industrial fieldbus or Ethernet protocols. By enabling seamless data exchange, they allow central programmable logic controllers (PLCs) or industrial PCs to monitor diagnostics, adjust parameters, and execute high-speed motion commands in real time.

Product Parameters

The technical characteristics of Lenze interface modules focus on networking compatibility, data throughput, and drive synchronization:

• Supported Network Protocols: Broad compatibility across global industrial standards, including EtherCAT, PROFINET, EtherNet/IP, CANopen, and Modbus TCP.

• Transmission Speed: High-speed Ethernet-based variants support 100 Mbps communication, while serial or fieldbus versions operate at standard protocol baud rates up to 12 Mbps for Profibus.

• Hardware Connections: Typically engineered with dual RJ45 ports to support daisy-chain network topologies, or terminal block connectors for serial bus wiring.

• Interface Compatibility: Custom-designed to plug directly into the dedicated expansion slots of specific Lenze drive families, such as the i500, i550, or 8400 series inverters and TopLine servo drives.

• Isolation Voltage: Integrated electrical isolation between the communication bus network and the internal drive control logic, commonly rated at 500V AC or higher.

• Power Consumption: Low power draw architecture, utilizing the drive's internal control voltage supply without requiring an external auxiliary power source.

Product Advantages

Lenze interface modules offer substantial operational benefits for modular machine building and precise motion control:

• Seamless Modular Expansion: The plug-and-play design allows standard Lenze inverters to be easily adapted to different factory network requirements without changing the core drive hardware.

• Real-Time Motion Performance: Modules supporting high-speed protocols like EtherCAT provide highly deterministic communication, allowing for tight synchronization of multi-axis servo systems.

• Simplified Engineering Integration: Fully compatible with Lenze's EASY Product Finder and PLC Designer software tools, allowing for straightforward commissioning, parameter replication, and device mapping.

• Space-Saving Architecture: By integrating directly into the housing footprint of the drive, these modules eliminate the need for external protocol gateways, saving valuable DIN rail space inside the control enclosure.

• Comprehensive Remote Diagnostics: Grants high-level automation systems direct access to internal drive parameters, fault logs, current consumption, and thermal statuses for efficient predictive maintenance.

Product Applications

These modules are widely utilized wherever Lenze drives need to be part of a coordinated machine network:

• Material Handling and Logistics: Interfacing inverters on long conveyor lines, sorting systems, and automated storage units with a centralized control system.

• Packaging Machinery: Providing the high-speed communication backbone necessary to synchronize rotary cutters, film feeds, and wrapping axes in vertical form fill seal machines.

• Printing and Paper Conversion: Coordinating multiple tension control and winding drives to maintain exact material placement at high web speeds.

• Automated Assembly Cells: Linking servo-driven robotic arms, rotary index tables, and pick-and-place stations to an EtherCAT or PROFINET master controller.

• Pump and Fan Systems: Connecting multi-pump configurations in building automation or industrial processing plants to optimize energy consumption via fieldbus coordination.

Important Precautions

To maintain communication network reliability and prevent drive hardware failure, follow these operational requirements:

• Power-Down Installation: Never insert, remove, or modify an interface module while power is applied to the drive. Doing so can cause permanent electrical damage to the drive's control card and the module's bus pins.

• Correct Network Termination: For fieldbus variations like CANopen or Profibus, make sure that a terminating resistor is correctly activated at the physical first and last nodes of the network to prevent signal reflection errors.

• Shielding and Grounding: Use only high-quality, industrial-shielded communication cables. Ensure the cable shield is properly grounded at the drive entry point to prevent electromagnetic noise from nearby motor cables from corrupting network packets.

• Address and Switch Configuration: Double-check any physical DIP switches or rotary dials on the module used for node addressing or baud rate selection before powering up, as setting duplicate addresses will cause severe network conflicts.

• Firmware Compatibility: Verify that the firmware version of the Lenze host drive is compatible with the specific version of the interface module being installed, as mismatched software can lead to communication initialization faults.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

LENZE EVS9325-EK

LENZE EVS9328-ESV004

LENZE GFQUTA100-22

LENZE GST05-2SVCK

LENZE MCA17N41-RS0B0

LENZE MDFKARS090-22

LENZE MDXMA2M080-12

LENZE PM2-500V

LENZE SDSGAXX056-22

LENZE VDE0530

LENZE 4/9916/0714

LENZE EVD533E

LENZE MDSKSRS-036-13

LENZE E94ASHE0134

LENZE EVD4907-E

LENZE EVF8601-E

LENZE EVF8602-E

LENZE EVF8603-E

LENZE EVF8609-E-V005

LENZE EVF9328-EV

LENZE EVS-9223-E

LENZE EVS9321-ETV907

LENZE EVS9327-EP

LENZE EVS9328-ES

LENZE EVS9328-KHV531

LENZE EVS9331-EK

LENZE E94AFHB-001

LENZE EVS9327-ESV004

LENZE EVF8222-E

LENZE MDSKABS071-22

LENZE MDSKAAG056-22

LENZE EVS9328-EI

LENZE E82EV371_2C200

LENZE DRA60-24A

LENZE EPL-10200-XX

LENZE E84AYCECV/S

LENZE EVS9321-EP

LENZE E82EV551-K4C

LENZE E82EV751-K2C200

LENZE RS4-4E

LENZE RS4-2E

LENZE ESMD152L4TXA

LENZE E82EV551-4C200

LENZE E82EV113-4C200

LENZE EVS9324-ESV004

LENZE RS4-4E 520085

LENZE IPRK95/44L.21

LENZE EVS9326ES

LENZE E82EV152K2C

LENZE E82EV302K4C000

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.