SPW484-53 S1 Yokogawa

SPW484-53 S1 Yokogawa Filter Modules

Product  Description：

Yokogawa Filter Modules are high-reliability hardware components designed for the CENTUM Distributed Control System (DCS) and specialized field instruments. These modules function as high-performance signal conditioning units that sit between field-side sensors and the input/output (I/O) processing cards. Their primary objective is to remove high-frequency noise, harmonic distortions, and electromagnetic interference from analog and digital signals, ensuring that only clean, accurate data is transmitted to the control system processor.

Product Parameters

The technical configuration of Yokogawa Filter Modules is tailored for precise signal preservation and noise suppression:

• Filter Type Options: Available in low-pass, high-pass, and band-pass configurations depending on the specific frequency ranges requiring suppression.

• Cutoff Frequency: Highly customizable or factory-preset cutoff frequencies, often ranging from 10Hz for slow process variables up to several kilohertz for high-speed signals.

• Insertion Loss: Exceptionally low insertion loss, typically maintained under 0.1 decibels, to minimize signal attenuation of the primary measurement.

• Attenuation Rate: Steep roll-off characteristics, often exceeding 24 decibels per octave, to rapidly eliminate unwanted noise beyond the cutoff frequency.

• Input Signal Compatibility: Supports standard industrial signals including 4-20mA DC current loops, 1-5V DC voltage lines, and high-frequency pulse trains from flowmeters.

• Isolation Voltage: Integrated galvanic isolation between input, output, and power circuits, commonly rated up to 1500V AC or higher.

Product Advantages

Integrating Yokogawa Filter Modules into a control architecture provides distinct operational benefits for process stability:

• Enhanced Signal Integrity: By eliminating electrical ripple and ambient noise, these modules significantly improve the signal-to-noise ratio, allowing for smoother and more precise loop control.

• Prevention of Aliasing: Critical for digital control systems, the filtering process acts as an anti-aliasing barrier, preventing high-frequency noise from being misidentified as true process changes during analog-to-digital conversion.

• Exceptional Temperature Stability: Built using high-precision, low-drift components that maintain consistent filtering characteristics across a broad operating temperature range.

• Cross-Talk Reduction: High channel-to-channel isolation prevents electrical signals on one line from bleeding into adjacent lines, which is vital when routing dense cable bundles.

• Diagnostic Capabilities: Select smart filter modules include onboard status monitoring to detect input overvoltage or hardware degradation, notifying the control room before a signal failure occurs.

Product Applications

These modules are critical in environments where heavy machinery or long cable runs introduce significant electrical noise:

• Variable Frequency Drive Environments: Filtering signals from temperature and pressure sensors located in close physical proximity to high-power VFDs and motors.

• Turbomachinery Monitoring: Condition monitoring of high-speed steam and gas turbines, where vibration and speed pulse sensors require clean high-frequency signal processing.

• Analytical Instrument Protection: Pre-filtering delicate low-voltage inputs from pH sensors, gas chromatographs, and oxygen analyzers before the data reaches the DCS.

• Long-Distance Field Telemetry: Stabilizing signals transmitted from remote tank farms or wellheads where long cable distances subject the lines to radio frequency and atmospheric interference.

• Custody Transfer Metering: Ensuring high-precision pulse train signals from positive displacement or turbine flowmeters are free from noise to maintain exact billing accuracy.

Important Precautions

To maintain optimal filtering characteristics and protect the system, technicians must observe the following instructions:

• Matching Frequency Profiles: Always verify that the cutoff frequency of the module matches the dynamics of your process. Using a filter that is too restrictive can introduce measurement lag into fast-acting control loops.

• Impedance Matching: Ensure that the source impedance of the field device and the load impedance of the receiving I/O module are compatible with the filter module specifications to prevent signal reflection.

• Ground Loop Prevention: Shielded cables must be grounded at a single, designated point. Incorrect shielding configurations can cause the filter module to become a path for ground loop currents, neutralizing its noise-reduction capabilities.

• Power Supply Requirements: For active filter modules requiring external power, utilize a clean, regulated DC supply. A noisy power input will degrade the module's filtering performance.

• Correct Orientation and Mounting: Install the module in the designated slot of the base unit or DIN rail assembly. Ensure all locking tabs are engaged to prevent vibration from loosening the electrical connections over time.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

Yokogawa VI702

Yokogawa EJX-530A

Yokogawa CP451-10

Yokogawa EC401-10

Yokogawa ALE111-S00

Yokogawa AFV10D

Yokogawa UT55A-040-11-00

Yokogawa ADV151

Yokogawa ANB10D

Yokogawa AAI143-S

Yokogawa AAI543-S

Yokogawa ADV551

Yokogawa SAI143-H63

Yokogawa PW301

Yokogawa AAI543-H00

Yokogawa EB401-10

Yokogawa UM-330-00

Yokogawa R/475-HP1EKLUGMT/S

Yokogawa UT55A-132-11-00

Yokogawa EC401-51

Yokogawa NFAI143H

Yokogawa NFDV151

Yokogawa NFPW444-10

Yokogawa NFAP135

Yokogawa NFSB100-S50

Yokogawa NFLR121

Yokogawa CP401

Yokogawa FLXA21-D-P-D-AB-C1-NN-A-N-LA-N-NN/UM

Yokogawa ADV151-P50

Yokogawa YTA610-JA1A2DK/X2/KU2

Yokogawa ADV151-P00

Yokogawa YTA110-EA4DN/KU2

Yokogawa VF701

Yokogawa SNT501

Yokogawa SDV541-S63

Yokogawa SDV144-S63

Yokogawa YS1700

Yokogawa EC401-50

Yokogawa RCCF31

Yokogawa SCP451-11

Yokogawa SCP461-51

Yokogawa SSC60D SCP461-51

Yokogawa 45TIT8055 YTA610

Yokogawa YTA320-FA2DB/KS15/S2

Yokogawa PW482-50

Yokogawa S9129FA

Yokogawa ADV551-P10

Yokogawa YHC5150X

Yokogawa YTA110-EA4DB

Yokogawa PW401-S2

Yokogawa SAI-143-H63

Yokogawa 436103

Yokogawa SAI143-H33

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.