PLX31-MBTCP-MBS4 PROSOFT Servo Controller
Product Description：
ProSoft Technology's solutions for servo control integration primarily consist of in-chassis communication modules for leading PLC platforms (like Rockwell Automation) and standalone protocol gateways. These products bridge the communication gap between the programmable logic controller (which manages the overall machine logic and motion commands) and the dedicated servo controller (which directly controls the servo motor's position, speed, and torque). They enable seamless data exchange, command execution, and status monitoring, allowing for precise and synchronized motion control in automated systems.
Key Functions
- Protocol Translation: Converts data and commands between the PLC's native communication protocol and the servo controller's specific communication protocol.
- Data Exchange: Facilitates the transfer of motion commands (e.g., target position, speed, acceleration), real-time feedback (e.g., actual position, motor current), and diagnostic data.
- Network Integration: Enables servo controllers to become integral parts of larger industrial networks, allowing for centralized control and data acquisition.
- Reduced Complexity: Simplifies the integration of different vendors' equipment by handling the complexities of protocol conversion.
Product Parameters (Typical for Communication Modules/Gateways)
Since ProSoft specializes in communication, the parameters are related to their communication modules or gateways, which enable servo control, rather than the servo drive itself.
- Supported PLC Platforms: E.g., Rockwell Automation ControlLogix, CompactLogix, MicroLogix.
- Supported Servo Controller Protocols: EtherNet/IP, PROFINET, Modbus TCP/IP, Modbus RTU, CANopen, etc. (depending on the specific ProSoft module/gateway).
- Network Interface(s): Ethernet ports (RJ45), Serial ports (RS-232, RS-485, RS-422).
- Data Capacity: Amount of data that can be exchanged (e.g., number of registers, I/O words).
- Communication Speed/Scan Time: How quickly data can be updated (e.g., microseconds to milliseconds).
- Operating Temperature: Typically 0°C to 60°C (32°F to 140°F) or wider for industrial environments.
- Power Consumption: E.g., 800 mA at 5 VDC (for in-chassis modules).
- Mounting: In-chassis slot (for modules), DIN rail mount (for gateways).
- Configuration Software: Dedicated software tools for module/gateway setup and diagnostics.
Product Advantages
- Seamless Integration: ProSoft solutions facilitate smooth communication between diverse industrial equipment, including servo controllers from various manufacturers, and leading PLC platforms. This reduces integration headaches and commissioning time.
- Interoperability: They enable systems with different communication protocols to work together efficiently, preventing vendor lock-in and allowing users to choose the best servo technology for their application.
- Modernization Support: ProSoft offers solutions to integrate newer servo technologies with existing legacy PLC systems, helping extend the life of valuable assets and facilitating phased upgrades.
- Reduced Development Time: By providing pre-engineered communication paths, ProSoft modules and gateways significantly reduce the time and effort required for custom protocol development.
- Reliability: Built for harsh industrial environments, these communication solutions ensure robust and dependable data exchange, crucial for precise motion control applications.
- Global Support: ProSoft Technology is known for offering free technical support for the life of their products, assisting users with complex integration challenges.
Precautions
- Compatibility Verification: Always confirm that the specific ProSoft module or gateway is compatible with both the PLC platform and the servo controller's communication protocol and version.
- Network Design: Proper industrial network design (IP addressing, subnetting, cabling, bandwidth considerations) is critical for reliable servo control communication, especially with high-speed motion.
- Configuration Accuracy: Incorrect configuration of the ProSoft module/gateway parameters can lead to communication errors, erratic motion, or system failures. Careful setup using the provided software tools is essential.
- Power Supply: Ensure stable and adequate power is supplied to the module or gateway, as well as to the servo controller and motor.
- Environmental Conditions: Install the equipment within the specified operating temperature, humidity, and vibration limits to ensure long-term reliability.
- Grounding and Shielding: Proper grounding and cable shielding practices are crucial to prevent electrical noise interference, which can affect motion control precision and communication integrity.
- Safety Interlocks: Communication interfaces are not typically safety-rated components. Ensure that critical safety functions (e.g., emergency stops, safe torque off) are implemented using dedicated safety-rated hardware and wiring, independent of the communication network.
Product Applications
ProSoft Technology's communication solutions enabling servo control are widely applied in industries requiring precise and dynamic motion control.
- Packaging Machinery: High-speed filling, sealing, labeling, and carton erecting machines where synchronized motion is critical.
- Material Handling: Robotic pick-and-place, automated guided vehicles (AGVs), conveyor systems requiring accurate positioning.
- Printing and Converting: Web handling, cutting, and stacking applications needing precise tension and registration control.
- Machine Tools: CNC machines, plasma cutters, and laser engravers for accurate axis positioning.
- Food and Beverage: Automated processing lines, bottling, and capping machines.
- Semiconductor Manufacturing: Wafer handling and precise positioning systems.
- Textile Machinery: Weaving, knitting, and spinning machines with intricate motion sequences.
The structure and details of the product：
Our services：
Shipping Port: China
Payment: Bank of Chicago, Bank of Singapore
Express cooperation: fedex, DHL, UPS and your express account
Service: Professional Sales provides 24 hours /7 days online service
Warranty: one year
Please make an inquiry for more models：
PROSOFT MVI56-GSC
PROSOFT MVI56-LTQ
PROSOFT MVI56-PDPMV1
PROSOFT MVI69-MNET
PROSOFT MVI94-GSC
PROSOFT MVI56-MCM
PROSOFT MVI94-MCM
PROSOFT MV156-PDPMV1
PROSOFT AN-X2-AB-DHRIO
PROSOFT PLX31-EIP-MBTCP
PROSOFT MVI56E-MCM
PROSOFT MVI69E-MBTCP
PROSOFT MVI46-PDPS
PROSOFT MV156E-MCMR
PROSOFT MVI46-ADMNET
PROSOFT MVI69E-MBS
PROSOFT MVI56E-MNET
PROSOFT MV169-MCM
PROSOFT MVI46-MCM
PROSOFT MVI56-EGD
PROSOFT MVI69-MCM
PROSOFT 5204-MNET-PDPMV1
PROSOFT MVI46-DFNT
PROSOFT MVI56-MCMR
PROSOFT RLX2-IHG-A
PROSOFT PLX31-EIP-MBS4
PROSOFT MVI56-ADM
PROSOFT MVI56E-MNETCR
PROSOFT PLX31-MBTCP-MBS4
PROSOFT MVI56-S3964R
PROSOFT MVI56-ADMNET
PROSOFT PTQ-PDPMV1
JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. Xiamen Rongfeng Electrical Equipment Co., Ltd. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.
This article is from the official website of Xiamen Rongfeng Electrical Equipment Co., Ltd. If reprinted, please attach this link: https://justwellltd.com .com
JUSTWELL PTE. LTD
Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.
