FS221/N 00016749-10 BACHMANN

FS221/N 00016749-10 BACHMANN Analog Output Modules

Product  Description：

Bachmann electronic provides high-precision Analog Output Modules designed for their M1 automation system. These modules are responsible for converting digital values from the controller's processor into standardized analog voltage or current signals. These signals are typically used to control proportional valves, frequency converters, or heating controllers, serving as the "muscles" of the control system that allow for smooth, continuous adjustments rather than simple on/off switching.

Product Parameters

The technical profile of Bachmann Analog Output Modules is defined by high resolution and flexible signal ranges:

• Output Signal Ranges: Configurable for standard voltage ranges such as ±10V, 0 to 10V, and current ranges such as 0 to 20mA or 4 to 20mA.

• Digital-to-Analog Resolution: High-precision conversion typically at 16-bit resolution, ensuring extremely fine increments in the output signal.

• Channel Density: Modules are available in various configurations, commonly offering 2, 4, or 8 independent output channels.

• Settling Time: Fast response capabilities with settling times often below 100 microseconds, allowing for high-dynamic control loops.

• Load Impedance: Support for a wide range of loads, typically up to 500 or 600 Ohms for current outputs and a minimum of 1k Ohm for voltage outputs.

• Accuracy and Linearity: Exceptional performance with low temperature drift and total error rates usually under 0.1 percent of the full scale.

Product Advantages

Bachmann Analog Output Modules are engineered for long-term stability and integration within the M1 ecosystem:

• Fully Integrated Diagnostics: The modules can detect and report wiring errors such as open circuits (for current loops) or short circuits (for voltage outputs) back to the CPU in real-time.

• Galvanic Isolation: Robust electrical isolation between the internal system bus and the output circuits protects the controller from field-side electrical interference and potential damage.

• Software Configuration: All parameters, including signal type and range, are set via software (SolutionCenter), eliminating the need for manual potentiometers or jumpers.

• Precise Synchronicity: When used within the M1 system, these modules support highly synchronized output updates, which is essential for multi-axis motion control or complex wind turbine pitch adjustments.

• Durable Industrial Build: Designed to withstand the extreme vibrations and temperature fluctuations common in energy and maritime applications.

Product Applications

These modules are used in industries where precise, variable control is mandatory:

• Wind Energy: Controlling the pitch of turbine blades or the torque of the generator by providing precise setpoint signals to hydraulic or electric actuators.

• Maritime Engineering: Governing engine speeds and stabilizing systems on ships where reliability under vibration is critical.

• Industrial Press Control: Managing the proportional valves that regulate pressure and flow in heavy-duty hydraulic presses.

• Renewable Power Plants: Interfacing with power electronics to regulate the reactive power and voltage output of large-scale inverters.

• Motion Control: Providing velocity setpoints to analog-controlled motor drives in legacy or specialized automation machinery.

Important Precautions

To ensure safety and maintain signal integrity, the following guidelines must be observed:

• Proper Shielding: Use high-quality shielded cables for all analog signals. The shield should be connected to a low-impedance ground at the module side to prevent electromagnetic interference from distorting the output.

• Voltage Drop Consideration: When using voltage outputs over long distances, be mindful of the voltage drop caused by the cable resistance. For long-distance transmission, 4-20mA current signals are generally preferred.

• External Power Supply: Many Bachmann analog modules require an external 24V DC supply to power the output circuitry. Ensure this power source is stable and meets the ripple specifications mentioned in the manual.

• Safe State Configuration: Configure the "Fail-Safe" behavior in the software. You must define whether the output should drop to 0V/0mA, hold the last value, or move to a specific safe value in the event of a controller stop or communication failure.

• Heat Dissipation: Install modules in the correct orientation to allow for natural air convection. Avoid placing these modules directly above high-heat components like power supplies within the control cabinet.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

BACHMANN DO232

BACHMANN MPC240

BACHMANN DIO264

BACHMANN AI204/SI

BACHMANN FM211

BACHMANN DIO232

BACHMANN FS212/N

BACHMANN OT115/R

BACHMANN SEM201

BACHMANN BS205

BACHMANN DIO32-C

BACHMANN RS204/T

BACHMANN tco216-c

BACHMANN FS221/N

BACHMANN MP213/E

BACHMANN ISI222

BACHMANN DIO16-c

BACHMANN RS204

BACHMANN PTAI216

BACHMANN ME203/N

BACHMANN FS211/N

BACHMANN CS200/N

BACHMANN NT255

BACHMANN EM203

BACHMANN WT205  LX800/DD512/CF512/VX

BACHMANN ACR222/2

BACHMANN BS206

BACHMANN DO216

BACHMANN FS211N

BACHMANN FS221/N

BACHMANN FS222/N

BACHMANN ISI202

BACHMANN MC205

BACHMANN FS211-N

BACHMANN DO232/DI232

BACHMANN MP226E

BACHMANN AI0288

BACHMANN BS207

BACHMANN BS208

BACHMANN BS209

BACHMANN LM201

BACHMANN SWI205

BACHMANN MPC240

BACHMANN DIO264

BACHMANN AI204/SI

BACHMANN AO202/SI

BACHMANN BS203

BACHMANN CNT204

BACHMANN AIO288

BACHMANN di232

BACHMANN DIO216

BACHMANN DO232

BACHMANN FS212/N

BACHMANN OT115/R

BACHMANN PATI216

BACHMANN SEM201

BACHMANN BS204

BACHMANN BS205

BACHMANN DIO32-C

BACHMANN DI016-C

BACHMANN BS210

BACHMANN RS204/T

BACHMANN FS212

BACHMANN DPM200

BACHMANN AI0288/1

BACHMANN 00012246-10

BACHMANN 00012245-00

BACHMANN B10467/00

BACHMANN 0001444-00

BACHMANN MX213/CF

BACHMANN DI232

BACHMANN PCC200

BACHMANN GMP232

BACHMANN FM221

BACHMANN AIO216

BACHMANN EM213

BACHMANN SDO204

BACHMANN SLC284

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.