U01JLD62A SIEMENS Output Module
Item NO.:
U01JLD62A SIEMENSGoods Stock:
3Payment:
T/TProduct Origin:
GermanyColor:
NewShipping Port:
ChinaLead Time:
2-3daysWeight:
0.55KGBrand:
SIEMENSU01JLD62A SIEMENS Output Module
Product Description:
The SIEMENS Output Module is a dedicated industrial signal output component in the SIMATIC automation ecosystem, acting as the final execution interface that converts digital control logic from the PLC controller into actionable physical signals for on-site industrial actuators. It is purpose-built to translate binary control commands or continuous setpoint values from the automation system into stable, standardized electrical signals that can directly drive field devices including solenoid valves, contactors, indicator lights, motor starters, proportional valves and variable frequency drives. Fully compatible with SIMATIC S7-1200, S7-1500 and the full ET 200 distributed I/O family, it supports seamless deployment on central control station backplanes or remote distributed I/O nodes, and integrates natively with the TIA Portal engineering platform for unified configuration, parameter tuning and real-time fault diagnosis.
The full SIEMENS Output Module portfolio covers digital, analog, fail-safe and high-power variants to match diverse industrial actuation requirements. Standard digital output modules are available in transistor type for high-speed DC loads and relay type for wide-range AC/DC loads, with channel counts ranging from 4 to 32 points per module to adapt to different I/O density needs. Transistor-type digital outputs support 24 V DC rated voltage, with per-channel output current from 0.5 A up to 2 A, and maximum switching frequency up to several thousand Hz for high-speed pulse control scenarios. Relay-type digital outputs carry contact ratings up to 5 A at 230 V AC, supporting direct switching of AC loads without intermediate relays. Analog output modules support standard 0-10 V voltage and 4-20 mA current signal ranges, with resolution up to 16-bit and output accuracy as high as ±0.1% of full scale, delivering smooth, jitter-free continuous signal regulation. Fail-safe output modules with distinctive yellow housing meet the highest PL e functional safety standards, designed for safety-related disconnection operations in critical process scenarios. The full product line carries IP20 protection rating for cabinet installation, with ruggedized variants supporting extended ambient operation temperatures from -25 °C to +60 °C, and all modules integrate channel-level short-circuit protection and real-time load monitoring functions.
The SIEMENS Output Module series has earned widespread industry recognition for its outstanding reliability and engineering convenience. Its strict industrial-grade hardware derating design and built-in overcurrent, overvoltage and thermal protection mechanisms effectively isolate fault risks from on-site actuators, preventing local load faults from spreading back to damage the main controller system. The channel-level electrical isolation design on premium variants completely eliminates common-mode interference between different output channels, avoiding unexpected signal drift or misoperation caused by ground loop noise in high electromagnetic interference industrial environments. The integrated intelligent diagnostic function can automatically detect load power loss, output wire breakage, short circuit and over-temperature faults on each individual channel, and push precise fault location information directly to the HMI or maintenance system, drastically cutting on-site troubleshooting time. The unified push-in spring terminal design across the entire product family allows tool-free fast wiring, reducing field wiring workload by more than 40% compared with traditional screw terminal modules. The full series maintains excellent backward compatibility with legacy SIMATIC S7 systems, enabling users to expand or replace output modules on existing old automation stations without modifying the core controller architecture, fully protecting long-term accumulated engineering investment.
Strict standardized operation protocols must be followed throughout the entire lifecycle of the SIEMENS Output Module to ensure long-term stable operation and avoid safety hazards. Technicians must fully disconnect all connected load power supplies and confirm no residual voltage remains on output channels before performing any installation, wiring or disassembly operations, to prevent electric shock or unexpected actuator misoperation that may cause personal injury. For inductive loads including solenoid valves, contactor coils and motor brake units, users must install matching freewheeling diodes or surge absorbers in parallel at the load side, to absorb the back electromotive force generated during rapid switching and avoid permanent damage to the output circuit. Never force an output module into a mismatched base unit that does not match its electrical specification, as this may cause irreversible damage to the module's internal power stage and backplane bus interface. Before the first system power-on, users must verify that the configured output signal range in TIA Portal completely matches the rated electrical parameters of the connected actuator, mismatched settings will lead to signal distortion or even permanent destruction of the on-site device. All maintenance and replacement operations must be completed exclusively by professionally trained certified industrial automation technicians who are fully familiar with relevant local industrial electrical safety regulations.
SIEMENS Output Modules are widely deployed across nearly all segments of modern industrial automation. They serve as the core execution hardware on automobile manufacturing assembly lines, packaging production lines and intelligent logistics sorting systems, driving thousands of distributed solenoid valves, conveyor motors and indicator alarms to maintain strict production beat accuracy. They are extensively used in process industry facilities in chemical, pharmaceutical and water treatment sectors, working in coordination with safety control systems to achieve reliable safety shutdown and emergency isolation for critical process equipment. They are the standard actuation solution for new energy production lines including lithium battery manufacturing and photovoltaic production, delivering high-precision analog signal output to control coating thickness, tension and temperature parameters to ensure product consistency. For harsh working condition scenarios such as port hoisting machinery and mining processing equipment, ruggedized high-power output modules with enhanced vibration and temperature resistance ensure long-term stable operation even under heavy shock and extreme ambient temperatures. In smart factory energy management systems, they control the on-off of high-power power distribution loops and the operating status of energy-consuming equipment, supporting fine-grained energy saving optimization for the entire plant.
The structure and details of the product:

Our services:
Shipping Port: China
Payment: Bank of Chicago, Bank of Singapore
Express cooperation: fedex, DHL, UPS and your express account
Service: Professional Sales provides 24 hours /7 days online service
Warranty: one year
Please make an inquiry for more models:
SIEMENS 6ES7141-54H00-0BA0
SIEMENS 6ES7143-5AH00-0BA0
SIEMENS 6ES7144-5KD00-0BA0
SIEMENS 6ES7157-1AB00-0AB0
SIEMENS 6ES5928-3UB21
SIEMENS 6EP1333-2BA20
SIEMENS 6SE7033-2EG84-1BH0
SIEMENS PXC50.D
SIEMENS 6SE7017-8FB61
SIEMENS 6SE7022-2FC61
SIEMENS 6SE7021-1FB61
SIEMENS 3VL3725-2AA36-0AA0
SIEMENS 6XV1870-3QE50
SIEMENS 6ES7231-7PD22-0XA8
SIEMENS 6GK7443-1GX30-0XE0
SIEMENS 6ES7400-1JA01-0AA0
SIEMENS 6ES7405-0KA02-0AA0
SIEMENS 3TF6844-8CM7
SIEMENS 3RH1921-1FA22
SIEMENS 3RB1066-2KG0
SIEMENS 6ES7214-1BE30-0XB0
SIEMENS 6ES7232-4HB30-0XB0
SIEMENS 6ES7222-1HF32-0XB0
SIEMENS 6SE7038-6EK84-1JC2
SIEMENS 1FK6081-6AF71-1ZZ9
SIEMENS TX12.OPEN
SIEMENS 6AV6647-0AD11-3AX0
SIEMENS 6SN2132-0AA11-1BA1
SIEMENS 6SN2155-0AA10-1BA1
SIEMENS 6GK5602-0BA00-2AA3
SIEMENS 6GK5734-1FX00-0AB0
SIEMENS 6GK74435DX050XE0
SIEMENS 6GK7443-1EX30-0XE0
SIEMENS 3ZX1012-ORT02-1AA1
SIEMENS 6SL3244-0BB12-1PA1
SIEMENS 3RH1921-1HA31
SIEMENS 3RV1021-1BA10
SIEMENS 3RH1911-1HA12
SIEMENS 3RV1021-1AA10
SIEMENS 3NA3022
SIEMENS 3NA7822
SIEMENS 6ES7952-1AK00-0AA0
SIEMENS 6ES7952-1AM00-0AA0
SIEMENS 6ES7331-7PF01-0AB0
SIEMENS QLCDM024DCBAN
JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.
This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com
JUSTWELL PTE. LTD
Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.

Tags :