SGMGH-06A2B2B YASKAWA

SGMGH-06A2B2B YASKAWA Analog Input Module

Product  Description：

Yaskawa Analog Input Modules are high-precision interface components designed for the MP series Machine Controllers. These modules convert continuous physical signals—such as voltage and current—into digital values that the controller can use for high-speed motion synchronization and process monitoring. Known for their high resolution and rapid sampling rates, Yaskawa analog modules are critical for applications that require a tight feedback loop between sensory input and motor output.

Product Parameters

The technical profile of a Yaskawa Analog Input Module is defined by its accuracy and integration with the Mechatrolink system:

• Input Ranges: Supports standard voltage inputs such as -10V to +10V, 0 to 10V, and 0 to 5V DC, as well as current inputs like 0 to 20mA and 4 to 20mA.

• Resolution: High-resolution conversion, typically 16-bit, providing a digital representation with up to 31,250 or 65,536 increments for maximum precision.

• Number of Channels: Available in various configurations, commonly offering 4 or 8 channels per module to balance space and connectivity.

• Conversion Speed: Optimized for motion control, with sampling speeds often matching the high-speed scan cycles of the controller, typically ranging from 250 microseconds to 1 millisecond.

• Input Impedance: High input impedance for voltage (typically 1M ohm) and low impedance for current (typically 250 ohms) to ensure signal integrity.

• Accuracy: Rated at +/- 0.1 percent to 0.3 percent of the full scale at room temperature, ensuring highly reliable data acquisition.

Product Advantages

Yaskawa Analog Input Modules offer several distinct benefits for industrial automation:

• High-Speed Synchronization: These modules are designed to work in perfect sync with Yaskawa servo drives, allowing analog feedback (like tension or pressure) to adjust motor behavior within a single control cycle.

• Advanced Noise Filtering: Built-in hardware filters and configurable software averaging functions help eliminate electromagnetic interference, which is common in environments with large motors and drives.

• Galvanic Isolation: Features robust electrical isolation between the field inputs and the internal system bus, protecting the expensive central processor from external electrical surges or ground loops.

• Flexible Scaling: The software interface allows users to easily map analog ranges to engineering units (such as liters per minute or bars of pressure) without complex manual calculations in the ladder logic.

• Wire-Break Detection: For 4-20mA configurations, the modules include integrated diagnostics to detect and alarm if a sensor wire is disconnected, preventing dangerous "open loop" conditions.

Product Applications

These modules are used in any scenario where precise measurement of variable physical forces is required:

• Tension Control: Monitoring load cells in printing presses, textile looms, and wire winding machines to maintain constant material tension.

• Pressure Monitoring: Collecting data from hydraulic and pneumatic sensors in injection molding machines and metal stamping presses.

• Temperature Regulation: Interfacing with signal conditioners to monitor heat levels in industrial ovens, chemical reactors, and extrusion lines.

• Flow Measurement: Tracking liquid or gas flow rates in utility management systems and chemical dosing applications.

• Position Feedback: Using analog potentiometers or ultrasonic sensors for secondary position verification in specialized material handling equipment.

Important Precautions

To ensure long-term accuracy and prevent hardware failure, the following precautions should be strictly followed:

• Shielding and Grounding: Always use shielded twisted-pair (STP) cables. The shield should be connected to the designated ground terminal on the module side only to avoid creating ground loops that introduce noise.

• Signal Separation: Never run analog signal wires in the same conduit or tray as high-voltage AC power lines or motor cables. Maintain a minimum distance of 200mm to prevent inductive coupling.

• Unused Channel Handling: To prevent fluctuating digital values caused by ambient noise, short-circuit the positive and negative terminals of any unused input channels or disable them in the module configuration settings.

• Correct Input Mode: Ensure the hardware jumpers (if applicable) and software settings match the sensor type (Voltage vs. Current). Applying a voltage signal to a channel configured for current can damage the internal shunt resistor.

• Stable Power Supply: Ensure the 24V DC power supply used for the module and the sensors is regulated and free from heavy switching noise, as fluctuations here can directly affect the accuracy of the analog-to-digital conversion.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

YASKAWA JAMSC-B1065

YASKAWA AK-BX410M

YASKAWA JAPMC-IO2304-T2

YASKAWA JAPMC-CM2302

YASKAWA YPHT31636-1C

YASKAWA CIMR-AA4A0005FAA

YASKAWA JEPMC-PC040

YASKAWA E131457

YASKAWA JUSP-OP02A-1

YASKAWA URX000256

YASKAWA CACR-IR3030CB

YASKAWA CIMR-VMS2030

YASKAWA SGM7J-08A7A6S

YASKAWA SGDH-1EAE

YASKAWA CIMR-MR5A2030

YASKAWA SGDA-04AP

YASKAWA SGM-04A312

YASKAWA JEPMC-PAS3012-E

YASKAWA JEPMC-BU2200-E

YASKAWA 2181F-01

YASKAWA JEPMC-REP2000-E

YASKAWA PS-02

YASKAWA CIMR-VC4A0004BAA

YASKAWA SGDV-7R6A11A

YASKAWA YPHT31624_1D

YASKAWA SGMGV-20ADA61

YASKAWA SGDV180A11A

YASKAWA SGMGV-55ADA61

YASKAWA CIMR-VU2A0020FAA

YASKAWA CIMR-VU2A0012FAA

YASKAWA CIMR-VU2A0006FAA

YASKAWA CIMR-VC4A0011BAA

YASKAWA SGDV-210D11A

YASKAWA CIMR-AT4A0031FAA

YASKAWA SGMGV09ADC61

YASKAWA SGMSH-50ACA61

YASKAWA VZA41P5BAA

YASKAWA PS-02 JACP-317121

YASKAWA SGM-08V312

YASKAWA SGD7S-2R8A20A

YASKAWA SGDV-170D11A020000

YASKAWA SGMRV-37ANA-YR12

YASKAWA SGMRV-13ANA-YR21

YASKAWA CIMR-G7A45P5

YASKAWA SGDS-30A12A

YASKAWA SGMG-1AA2AB

YASKAWA CIMR-G7A4015

YASKAWA YPHT31600-1D

YASKAWA SGDV-1R6A01A

YASKAWA SGM7J-02AFA61-200W

YASKAWA SGD7S-1R6A20A

YASKAWA JEPMC-W6012-A5-E-MIII

YASKAWA SGD7S-330A

YASKAWA SGMAV-04A3A61

YASKAWA 972-ODP10

YASKAWA SGD7S-7R6A

YASKAWA JAMSC-120DDI35400

YASKAWA YPCT31200-1C

YASKAWA SJME-08AMB41

YASKAWA AK-BX410M

YASKAWA SGMSH-15D2A6E-OY

YASKAWA CIMR-JCBA0003BAA

YASKAWA 73600-A0151

YASKAWA CACR-SR15BB1BM

YASKAWA SGMG-09A2AB

YASKAWA PMC-U-MP23S16

YASKAWA CACR-PR10BC3CSY10

YASKAWA JACP-317803

YASKAWA JACP-317800

YASKAWA H3Y-4DC

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.