SGMDH-12A2A-YR13 YASKAWA

SGMDH-12A2A-YR13 YASKAWA Analog Output Modules

Product  Description：

Yaskawa Analog Output Modules are high-precision expansion units designed for the MP (Machine Controller) series. These modules convert digital data from the controller's CPU into continuous analog voltage or current signals. They are primarily used to provide commands to external equipment that requires variable control, such as variable frequency drives (VFDs), hydraulic valves, and heating power controllers. By utilizing high-resolution digital-to-analog conversion, these modules enable the fine-tuning of machine parameters with millisecond responsiveness.

Product Parameters

The technical performance of Yaskawa Analog Output Modules is defined by their precision and signal flexibility:

• Output Signal Ranges: Configurable for multiple standards, typically including voltage outputs of -10V to +10V DC, 0-10V DC, and 0-5V DC, as well as current outputs of 0-20mA and 4-20mA.

• Digital Resolution: Features high-resolution conversion, often 16-bit (1/65536) or 12-bit (1/4096), allowing for extremely smooth transitions in output values.

• Channel Density: Offered in various configurations, commonly with 2, 4, or 8 independent output channels per module.

• Conversion Speed: Optimized for motion-synchronous control with update times as fast as 125 microseconds to 500 microseconds per channel.

• Load Impedance: Voltage outputs typically support loads of 1k Ohm or higher, while current outputs handle loop resistances up to 600 Ohms.

• Accuracy: High linearity with minimal temperature drift, usually rated within plus or minus 0.1 percent to 0.3 percent of the full scale.

Product Advantages

Yaskawa’s analog technology is engineered for high-performance motion and process integration:

• Superior Response Stability: Designed to eliminate output "glitches" during value changes, ensuring that connected actuators or drives receive a clean, stable command signal.

• Integrated Scaling and Offsets: The module firmware often allows for digital scaling, enabling the user to define output values in engineering units (like RPM or Liters/Minute) directly within the controller software.

• Robust Galvanic Isolation: Provides high-level electrical isolation between the internal bus and the analog output terminals, protecting the central unit from external electrical surges or ground loops.

• Diagnostic Feedback: Includes status monitoring for output circuit health, with some models capable of detecting open loops in current-driven circuits.

• Compact Modular Form: Easily snaps onto the MP-series base unit, reducing wiring complexity and saving space within the control cabinet.

Product Applications

These modules are essential for any system requiring variable, non-discrete control:

• Speed Control for Inverters: Providing a 0-10V or 4-20mA reference signal to Yaskawa or third-party AC drives to manage motor velocity.

• Tension and Torque Regulation: Controlling magnetic powder clutches and brakes in printing and winding machinery to maintain constant material tension.

• Valve Position Control: Managing the opening percentage of proportional hydraulic or pneumatic valves in heavy machinery and molding equipment.

• Temperature Setpoint Transmission: Sending variable signals to external temperature controllers or power regulators in industrial furnaces.

• Chart Recorders and Displays: Outputting process variables to analog meters or data logging systems for visual monitoring.

Important Precautions

To ensure precise signal transmission and hardware longevity, the following guidelines must be implemented:

• Shielded Wiring: Use high-quality shielded twisted-pair cables for all analog output lines. The shield should be grounded only at the controller side to prevent circulating ground currents from introducing noise.

• External Power Sequence: When using modules that require an external 24V DC power supply for the analog circuit, ensure the power is stable before the controller begins sending output commands.

• Avoid High-Voltage Proximity: Route analog output cables away from AC power lines, motor leads, and relay contactors. A minimum separation of 200mm is recommended to prevent inductive interference.

• Impedance Matching: Verify that the input impedance of the receiving device (e.g., an inverter's analog input) falls within the specified drive capability of the Yaskawa module to prevent signal attenuation.

• Unused Channel Configuration: For safety and to reduce internal power consumption, disable any unused channels in the controller's hardware configuration software.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

YASKAWA JAMSC-B1065

YASKAWA AK-BX410M

YASKAWA JAPMC-IO2304-T2

YASKAWA JAPMC-CM2302

YASKAWA YPHT31636-1C

YASKAWA CIMR-AA4A0005FAA

YASKAWA JEPMC-PC040

YASKAWA E131457

YASKAWA JUSP-OP02A-1

YASKAWA URX000256

YASKAWA CACR-IR3030CB

YASKAWA CIMR-VMS2030

YASKAWA SGM7J-08A7A6S

YASKAWA SGDH-1EAE

YASKAWA CIMR-MR5A2030

YASKAWA SGDA-04AP

YASKAWA SGM-04A312

YASKAWA JEPMC-PAS3012-E

YASKAWA JEPMC-BU2200-E

YASKAWA 2181F-01

YASKAWA JEPMC-REP2000-E

YASKAWA PS-02

YASKAWA CIMR-VC4A0004BAA

YASKAWA SGDV-7R6A11A

YASKAWA YPHT31624_1D

YASKAWA SGMGV-20ADA61

YASKAWA SGDV180A11A

YASKAWA SGMGV-55ADA61

YASKAWA CIMR-VU2A0020FAA

YASKAWA CIMR-VU2A0012FAA

YASKAWA CIMR-VU2A0006FAA

YASKAWA CIMR-VC4A0011BAA

YASKAWA SGDV-210D11A

YASKAWA CIMR-AT4A0031FAA

YASKAWA SGMGV09ADC61

YASKAWA SGMSH-50ACA61

YASKAWA VZA41P5BAA

YASKAWA PS-02 JACP-317121

YASKAWA SGM-08V312

YASKAWA SGD7S-2R8A20A

YASKAWA SGDV-170D11A020000

YASKAWA SGMRV-37ANA-YR12

YASKAWA SGMRV-13ANA-YR21

YASKAWA CIMR-G7A45P5

YASKAWA SGDS-30A12A

YASKAWA SGMG-1AA2AB

YASKAWA CIMR-G7A4015

YASKAWA YPHT31600-1D

YASKAWA SGDV-1R6A01A

YASKAWA SGM7J-02AFA61-200W

YASKAWA SGD7S-1R6A20A

YASKAWA JEPMC-W6012-A5-E-MIII

YASKAWA SGD7S-330A

YASKAWA SGMAV-04A3A61

YASKAWA 972-ODP10

YASKAWA SGD7S-7R6A

YASKAWA JAMSC-120DDI35400

YASKAWA YPCT31200-1C

YASKAWA SJME-08AMB41

YASKAWA AK-BX410M

YASKAWA SGMSH-15D2A6E-OY

YASKAWA CIMR-JCBA0003BAA

YASKAWA 73600-A0151

YASKAWA CACR-SR15BB1BM

YASKAWA SGMG-09A2AB

YASKAWA PMC-U-MP23S16

YASKAWA CACR-PR10BC3CSY10

YASKAWA JACP-317803

YASKAWA JACP-317800

YASKAWA H3Y-4DC

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.