QC10TR MITSUBISHI

QC10TR MITSUBISHI Gate Module

Product  Description：

Mitsubishi Electric Gate Modules, often referred to as Gate Drivers or Gate Driver Units (GDUs), serve as the critical interface between low-power control logic and high-power semiconductors such as IGBTs or SiC MOSFETs. These modules are specifically engineered to provide the high-current pulse required to switch power devices rapidly and efficiently while maintaining electrical isolation between the high-voltage power stage and the sensitive control circuitry.

Product Parameters

The technical profile of a Mitsubishi Gate Module typically encompasses the following specifications:

• Drive Current: High peak output currents, often ranging from 2A to 15A, to ensure fast charging and discharging of the gate capacitance for clean switching.

• Isolation Voltage: Built-in galvanic isolation, commonly rated at 2500V to 4000V AC, to protect control circuitry from high-voltage transients.

• Supply Voltage Range: Operating voltages usually between 15V and 24V DC for the secondary side to ensure full saturation and efficient conduction of the power device.

• Propagation Delay: Minimal signal delay, often under 500 nanoseconds, allowing for high-frequency switching and precise pulse-width modulation (PWM) control.

• Dead Time Management: Integrated adjustable dead-time control to prevent "shoot-through" currents in half-bridge or full-bridge configurations.

• Operating Temperature: Industrial grade ratings, typically supporting an ambient range of -40°C to 85°C.

Product Advantages

Mitsubishi Gate Modules are preferred in high-performance power electronics due to several key technical benefits:

• Integrated Protection Suite: These modules often include "Desaturation Detection" (Desat) to monitor for short circuits and "Soft Turn-off" capabilities to safely shut down the system without inductive voltage spikes.

• Optimized Efficiency: By minimizing switching transitions through rapid gate charging, these modules significantly reduce the heat generated by the power stage, leading to higher overall system efficiency.

• Noise Immunity: Excellent Common Mode Rejection (CMR) performance ensures that the gate signal remains stable even in environments with extreme electromagnetic interference (EMI).

• Compact Design: High level of integration reduces the number of discrete components needed on the PCB, which simplifies board layout and improves overall system reliability.

• Seamless Compatibility: Specifically tuned to match the gate characteristics of Mitsubishi IGBT and SiC modules, ensuring optimal performance out of the box.

Product Applications

These modules are essential components in various high-power systems across multiple sectors:

• Motor Drives: Used in industrial inverters and servo drives to control the speed and torque of AC motors in manufacturing plants.

• Renewable Energy: Facilitating efficient power conversion in solar inverters and wind turbine pitch control systems.

• Electric Vehicles (EVs): Integral to the traction inverters that convert battery DC power into AC power for the vehicle's drivetrain and motor control.

• Uninterruptible Power Supplies (UPS): Managing the fast switching required to maintain clean power output during grid failures or voltage sags.

• Railway Traction: Driving the high-power converters found in electric locomotives and high-speed trains where safety and durability are paramount.

Important Precautions

Correct handling and installation are vital to prevent module failure or system damage:

• Supply Stability: Use high-quality decoupling capacitors with low equivalent series resistance (ESR) close to the module’s power pins to prevent voltage drops during high-current switching events.

• Gate Resistor Selection: The choice of external gate resistors is critical; if the resistance is too low, it may cause EMI or oscillation, while too high resistance increases switching losses and heat.

• Creepage and Clearance: Ensure that the PCB layout maintains sufficient physical distance between the high-voltage and low-voltage sides to prevent electrical arcing or tracking.

• Thermal Dissipation: While the driver itself generates relatively little heat compared to the IGBT, ensure it is not placed directly next to high-heat components without adequate airflow or shielding.

• Grounding Practices: Implement a dedicated signal ground and a separate power ground to minimize noise coupling between the control logic and the gate drive power stage.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

MITSUBISHI QO3UDCPU

MITSUBISHI FX2N-16EX-ES/UL

MITSUBISHI FR-A7NC

MITSUBISHI FR-A7AP

MITSUBISHI MR-J2S-10A

MITSUBISHI MR-J2S-350A

MITSUBISHI GT2105-QTBDS

MITSUBISHI HG-SR102J

MITSUBISHI MR-H700AN

MITSUBISHI MR-J3-11KB

MITSUBISHI MR-E-10A-KH003

MITSUBISHI E3X-SD51

MITSUBISHI A8NEIP-2P

MITSUBISHI GM-DB

MITSUBISHI HG-KR43

MITSUBISHI HF-KP23B

MITSUBISHI HG-SR524

MITSUBISHI NF30CS, 2P 10A

MITSUBISHI NF30CS, 3P 30A

MITSUBISHI R02CPU

MITSUBISHI FX-EEPROM-8

MITSUBISHI FX2N-128MR-ES/UL

MITSUBISHI FX2N-32MR-ES/UL

MITSUBISHI HC-KFS23K-S49

MITSUBISHI CH-7302

MITSUBISHI FR-A540-2.2K-EC

MITSUBISHI FX3U-128M

MITSUBISHI FX2N-4DA

MITSUBISHI FX2N-4AD

MITSUBISHI E1100

MITSUBISHI MR-S11-200-Z37

MITSUBISHI QD77MS2

MITSUBISHI Q64TD

MITSUBISHI MR-S11-300-N

MITSUBISHI MR-S11-300-Z37

MITSUBISHI FX0N-16EX/UL

MITSUBISHI E1032

MITSUBISHI FR-F840-00170-2-60

MITSUBISHI FR-BU2-H55K

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.