MDSKSRS-056-23 LENZE

MDSKSRS-056-23 Basis unit

Product  Description：

Lenze Base Units, primarily recognized as foundational elements in the Lenze Inverter Drives 8400 ecosystem (spanning the BaseLine, StateLine, HighLine, and TopLine series) as well as the 9400 HighLine servo series, represent the core power and mechanical installation block of a drive framework. The base unit integrates the primary power electronics, rectifiers, and DC bus bars, serving as the essential platform onto which pluggable memory modules, communication modules, and safety modules are attached to create a complete, rightsized drive or positioning system.

Product Parameters

The technical composition of a Lenze Base Unit focuses on scalable power execution and robust baseline electrical metrics:

• Power Output Range: Scaled comprehensively from 0.25 kW up to 45 kW depending on the module frame size and drive generation.

• Mains Voltage Classes: Available in single-phase 230V/240V AC for lower capacity metrics and three-phase 400V/500V AC options for standard industrial environments.

• Overload Capacity: Provides strong dynamic responses, commonly engineered for 180 percent of rated torque for 60 seconds, or up to 210 percent for 3 seconds on advanced frame sizes.

• Internal Chopper Frequency: Configurable switching rates running at 1, 2, 4, 8, or 16 kHz to balancing thermal efficiency against acoustic noise.

• Output Frequency Limit: Typically outputs standard industrial variations up to 650 Hz, supporting both standard induction motors and high-speed synchronous machines.

• Integrated Base Interfaces: Standard configurations provide 4 digital inputs, 1 digital output, and at least 1 analog input channel, alongside essential motor brake control pathways.

Product Advantages

Lenze Base Units are designed around modular cost optimization and decentralized processing efficiency:

• Scaled Functional Matching: By separating the physical base unit from the diagnostic, communication, and safety modules, users purchase only the power level required, upgrading control intelligence independently.

• Space-Saving Design: The compact physical layout allows for direct side-by-side mounting in the control cabinet without intermediate spaces, significantly reducing thermal cabinet footprints.

• Flexible Installation Alternatives: Aside from standard panel mounting, base units support push-through installations (directing heat dissipation outside the cabinet) or cold-plate techniques leveraging customer-specific heatsinks.

• Dynamic Motor Versatility: The native motor control block handles basic linear V/f control, quadratic V/f control for energy savings, sensorless vector control, and sensorless torque regulation out of the box.

• Embedded Hardware Safeguards: Features dedicated motor overload protection and a high baseline level of electromagnetic compatibility (EMC) via optional integrated mains filters.

Product Applications

These base units establish the primary dynamic power platform for diverse moving automation segments:

• Material Handling Systems: Serving as the main drive for continuous conveyor systems, cross-belt sorters, and high-frequency luggage sorting belts.

• Pumps and Ventilation Fans: Utilizing the specialized quadratic V/f curve characteristics to manage flow loops and air volume exchanges while optimizing power demand.

• Traveling and Traversing Drives: Operating as the speed and torque control hub for heavy overhead gantry cranes, rail shuttles, and automated transfer cars.

• Basic Positioning Systems: Driving automated storage and retrieval machines, turntable positioning indices, and lifting tables.

• Packaging Automation: Managing decentralized power lines in feeding belts, automated bagging setups, and shrink-wrapping machinery.

Important Precautions

To protect the power electronics and maintain operational integrity, the following implementation guidelines must be followed:

• Earth Leakage Current Warning: Due to integrated EMC filters, these units exhibit high capacitive leakage currents to earth. Ensure that a secure, permanent protective earth connection is established using double-conductors or heavy gauge lines before applying power.

• Correct Mains Topology Verification: Prior to connection, verify whether the local plant network is an IT system (isolated earth) or a grounded TN/TT network. Operating standard base units on an IT system without removing the internal physical grounding screws can lead to instant internal failure.

• Cooling Pathway Clearance: Maintain clear, unobstructed paths at the top and bottom of the base unit enclosure if mounted inside a standard cabinet. Restricting the airflow profiles will cause accelerated thermal aging of the internal power capacitors and premature trip actions.

• Pluggable Module Management: Never insert, adjust, or remove keypads, communication modules, or memory modules while the base unit is energized. Power down the system completely and verify that all status lights are dark before modifying modules.

• Capacitor Residual Energy Discharge: The high-capacity internal DC bus capacitors retain dangerous electrical potential after mains detachment. Always wait a minimum of five minutes following full isolation before initiating terminal modifications or physical inspections.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

LENZE EVS9325-EK

LENZE EVS9328-ESV004

LENZE GFQUTA100-22

LENZE GST05-2SVCK

LENZE MCA17N41-RS0B0

LENZE MDFKARS090-22

LENZE MDXMA2M080-12

LENZE PM2-500V

LENZE SDSGAXX056-22

LENZE VDE0530

LENZE 4/9916/0714

LENZE EVD533E

LENZE MDSKSRS-036-13

LENZE E94ASHE0134

LENZE EVD4907-E

LENZE EVF8601-E

LENZE EVF8602-E

LENZE EVF8603-E

LENZE EVF8609-E-V005

LENZE EVF9328-EV

LENZE EVS-9223-E

LENZE EVS9321-ETV907

LENZE EVS9327-EP

LENZE EVS9328-ES

LENZE EVS9328-KHV531

LENZE EVS9331-EK

LENZE E94AFHB-001

LENZE EVS9327-ESV004

LENZE EVF8222-E

LENZE MDSKABS071-22

LENZE MDSKAAG056-22

LENZE EVS9328-EI

LENZE E82EV371_2C200

LENZE DRA60-24A

LENZE EPL-10200-XX

LENZE E84AYCECV/S

LENZE EVS9321-EP

LENZE E82EV551-K4C

LENZE E82EV751-K2C200

LENZE RS4-4E

LENZE RS4-2E

LENZE ESMD152L4TXA

LENZE E82EV551-4C200

LENZE E82EV113-4C200

LENZE EVS9324-ESV004

LENZE RS4-4E 520085

LENZE IPRK95/44L.21

LENZE EVS9326ES

LENZE E82EV152K2C

LENZE E82EV302K4C000

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.