MDS-C1-SP-37 MITSUBISHI

MDS-C1-SP-37 MITSUBISHI Filter Modules

Product  Description：

Mitsubishi Electric Filter Modules are specialized electromagnetic compatibility (EMC) components designed to suppress electrical noise and harmonic distortion in power electronics systems. These modules are primarily used in conjunction with Variable Frequency Drives (VFDs), servo amplifiers, and power supplies to ensure that high-frequency switching noise does not interfere with sensitive control circuitry or violate grid regulations. By filtering out unwanted electromagnetic interference (EMI), these modules act as a protective barrier that maintains signal integrity and equipment longevity.

Product Parameters

The technical profile of a Mitsubishi Filter Module is defined by its attenuation capabilities and electrical ratings:

• Rated Voltage: Supports a wide range of operating environments, including 200V-240V AC for single-phase systems and 380V-480V AC for three-phase industrial grids.

• Rated Current: Available in various capacities to match the power stage, typically ranging from 5A for small servo drives to over 600A for large-scale inverters.

• Leakage Current: Optimized to stay within safety standards (often below 3.5mA or 10mA depending on the model) to prevent nuisance tripping of Ground Fault Circuit Interrupters (GFCIs).

• Attenuation Frequency Range: Highly effective in the 150kHz to 300MHz range, targeting both conducted and radiated emissions.

• Insertion Loss: Provides high decibel (dB) reduction across the frequency spectrum to ensure compliance with EN/IEC 61800-3 standards.

• Operating Temperature: Designed for industrial durability, typically rated for operation between -25°C and 50°C without derating.

Product Advantages

Mitsubishi Filter Modules provide essential benefits for the stability of automated environments:

• Compliance with Global Standards: These modules allow machines to meet strict EMC directives required for CE, UL, and CSA certifications, facilitating global export.

• Protection of Sensitive Electronics: By suppressing high-frequency noise, they prevent "ghost" signals and logic errors in nearby sensors, PLCs, and communication lines.

• Extended Equipment Life: Reducing the harmonic content and voltage spikes helps prevent the overheating of motor windings and the premature failure of cable insulation.

• Noise Reduction: Significantly lowers the audible and electrical noise generated by high-speed PWM (Pulse Width Modulation) switching in inverters.

• Integrated Design: Many Mitsubishi filters are footprint-type modules, meaning they can be mounted directly behind or beneath the drive to save valuable space inside the control cabinet.

Product Applications

These modules are indispensable in environments where power quality and signal precision are paramount:

• Servo and Motion Control: Preventing interference in high-precision robotic arms and CNC machines where electrical noise can cause positioning errors.

• Industrial Drive Systems: Used with VFDs in fans, pumps, and conveyors to prevent the drive from polluting the factory's main power grid.

• Medical Equipment: Ensuring that power conversion stages do not interfere with sensitive diagnostic imaging or patient monitoring devices.

• Telecommunications: Protecting data centers and communication hubs from the switching noise of large-scale Uninterruptible Power Supplies (UPS).

• Elevator Systems: Reducing electromagnetic radiation in residential and commercial buildings to prevent interference with radio and television signals.

Important Precautions

To achieve effective noise suppression and ensure safety, the following guidelines must be followed:

• Shortest Possible Wiring: The cables between the filter and the drive must be kept as short as possible. Long wires act as antennas and can re-radiate the noise that the filter just removed.

• Correct Grounding: The filter must be mounted on a well-grounded, unpainted metal plate. Ensuring a large surface area contact for the ground is more effective than a single thin wire for high-frequency noise.

• Separation of Input and Output: Never bundle the "Line" (input) and "Load" (output) wires together. If they are placed in the same conduit or tied together, the noise will bypass the filter via electromagnetic coupling.

• Heat Dissipation: Ensure the filter is not mounted in a stagnant air pocket. While they are efficient, filters can generate heat during high-current operation and require adequate airflow.

• Voltage Discharge: Like power supplies, filters contain capacitors. After disconnecting the power, wait several minutes for the internal charge to dissipate before touching the terminals.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

MITSUBISHI QO3UDCPU

MITSUBISHI FX2N-16EX-ES/UL

MITSUBISHI FR-A7NC

MITSUBISHI FR-A7AP

MITSUBISHI MR-J2S-10A

MITSUBISHI MR-J2S-350A

MITSUBISHI GT2105-QTBDS

MITSUBISHI HG-SR102J

MITSUBISHI MR-H700AN

MITSUBISHI MR-J3-11KB

MITSUBISHI MR-E-10A-KH003

MITSUBISHI E3X-SD51

MITSUBISHI A8NEIP-2P

MITSUBISHI GM-DB

MITSUBISHI HG-KR43

MITSUBISHI HF-KP23B

MITSUBISHI HG-SR524

MITSUBISHI NF30CS, 2P 10A

MITSUBISHI NF30CS, 3P 30A

MITSUBISHI R02CPU

MITSUBISHI FX-EEPROM-8

MITSUBISHI FX2N-128MR-ES/UL

MITSUBISHI FX2N-32MR-ES/UL

MITSUBISHI HC-KFS23K-S49

MITSUBISHI CH-7302

MITSUBISHI FR-A540-2.2K-EC

MITSUBISHI FX3U-128M

MITSUBISHI FX2N-4DA

MITSUBISHI FX2N-4AD

MITSUBISHI E1100

MITSUBISHI MR-S11-200-Z37

MITSUBISHI QD77MS2

MITSUBISHI Q64TD

MITSUBISHI MR-S11-300-N

MITSUBISHI MR-S11-300-Z37

MITSUBISHI FX0N-16EX/UL

MITSUBISHI E1032

MITSUBISHI FR-F840-00170-2-60

MITSUBISHI FR-BU2-H55K

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.