MCA17N35-RS0P1 LENZE

MCA17N35-RS0P1  Output Module

Product  Description：

Lenze output modules, serving as key components within the Lenze I/O system lines such as the i700 series, g500 series, and modular remote I/O architectures, are engineered to control actuators, valves, relays, and indicators. These modules act as the vital link between a central controller, such as a Lenze Controller 3200 C or c500, and the physical machinery components. They translate digital commands from the control network into the precise electrical outputs required for dynamic motion and discrete industrial task execution.

Product Parameters

The technical composition of a Lenze output module focuses on fast response times, electrical safety, and precise power handling:

• Channel Configuration: Available in varying channel densities, typically offering 4-channel, 8-channel, or 16-channel configurations to match specific system layouts.

• Output Signal Types: Divided into digital outputs (typically 24V DC for standard switching tasks) and analog outputs (configurable for 0-10V, minus 10 to plus 10V, or 4-20mA for variable control).

• Current Capacity: Digital transistor outputs are commonly rated for 0.5A per channel, with high-capacity variants supporting up to 2A per channel for heavy inductive loads.

• Switching Frequency: High-speed transistor modules support rapid pulse widths, often handling switching frequencies up to several kilohertz for pulse-width modulation (PWM) tasks.

• Resolution (Analog): High-precision analog output modules provide 12-bit to 16-bit resolution, ensuring smooth and accurate setpoint transmission to external drives or positioning valves.

• Network Connection: Communicates with the main controller via standard industrial backplane buses or remote fieldbuses including EtherCAT, PROFINET, or CANopen.

Product Advantages

Lenze output modules provide notable performance benefits aimed at increasing machinery throughput and reducing installation complexity:

• High-Speed Synchronicity: Optimized for integration with EtherCAT networks, allowing outputs to be triggered with microsecond-level synchronization, which is essential for high-performance packaging and printing machinery.

• Advanced Diagnostic Insights: Onboard intelligent diagnostic circuitry provides real-time monitoring, capable of detecting short circuits, overloads, and open-load wire breaks, sending instant error reports to the central controller.

• Compact Modular Footprint: The slice-type slim mechanical design minimizes the required space on the DIN rail inside control enclosures, enabling dense panel layouts.

• Push-In Terminal System: Tool-free, vibration-resistant push-in connection technology significantly decreases wiring time during machine assembly and ensures long-term connection reliability.

• Seamless Drive Integration: Built to match the exact signal requirements of Lenze frequency inverters and servo drives, reducing the engineering time needed for custom signal conditioning.

Product Applications

These output modules are widely used across machine manufacturing and factory automation environments:

• Packaging Machinery: Controlling high-speed pneumatic valves, sorting gates, and sealing elements in vertical form-fill-seal (VFFS) machines and cartoners.

• Material Handling and Logistics: Actuating dynamic diverters, brake modules, and indicator lights along complex conveyor systems and automated sorting lines.

• Textile Production Equipment: Sending high-speed control pulses to yarn tensioners, winding mechanisms, and pattern control needles.

• Robotics and Assembly Cells: Driving small DC actuators, gripper mechanisms, and warning towers within synchronized automated workstations.

• Motion Control Synchronization: Transmitting high-precision analog speed or torque reference signals to non-networked legacy motor drives or proportional hydraulic valves.

Important Precautions

To guarantee safe operation and protect the internal hardware components from unexpected damage, the following instructions must be implemented:

• Inductive Load Protection: When controlling highly inductive loads such as heavy-duty solenoids or mechanical relays, always ensure proper external freewheeling diodes or surge suppressors are installed to protect the output transistors from inductive voltage spikes.

• External Power Sourcing: Ensure that the external 24V DC power supply feeding the output channels is properly regulated and fitted with fast-acting fuses to prevent local short circuits from overloading the module.

• Current Limit Adherence: Never exceed the total maximum current allowed for the entire module, even if individual channels are operating within their specific limits. Overloading the common bus will cause thermal degradation of the internal circuitry.

• Hot-Swapping Restrictions: Unless explicitly stated in the specific module manual, do not remove or insert the output slice while the system bus is powered on, as this can cause data corruption or electrical arcing across the backplane contacts.

• Signal Cable Separation: Route analog output cables using shielded twisted pairs, keeping them completely isolated from high-voltage AC motor lines to eliminate the risk of electromagnetic noise corruption on sensitive control signals.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

LENZE EVS9325-EK

LENZE EVS9328-ESV004

LENZE GFQUTA100-22

LENZE GST05-2SVCK

LENZE MCA17N41-RS0B0

LENZE MDFKARS090-22

LENZE MDXMA2M080-12

LENZE PM2-500V

LENZE SDSGAXX056-22

LENZE VDE0530

LENZE 4/9916/0714

LENZE EVD533E

LENZE MDSKSRS-036-13

LENZE E94ASHE0134

LENZE EVD4907-E

LENZE EVF8601-E

LENZE EVF8602-E

LENZE EVF8603-E

LENZE EVF8609-E-V005

LENZE EVF9328-EV

LENZE EVS-9223-E

LENZE EVS9321-ETV907

LENZE EVS9327-EP

LENZE EVS9328-ES

LENZE EVS9328-KHV531

LENZE EVS9331-EK

LENZE E94AFHB-001

LENZE EVS9327-ESV004

LENZE EVF8222-E

LENZE MDSKABS071-22

LENZE MDSKAAG056-22

LENZE EVS9328-EI

LENZE E82EV371_2C200

LENZE DRA60-24A

LENZE EPL-10200-XX

LENZE E84AYCECV/S

LENZE EVS9321-EP

LENZE E82EV551-K4C

LENZE E82EV751-K2C200

LENZE RS4-4E

LENZE RS4-2E

LENZE ESMD152L4TXA

LENZE E82EV551-4C200

LENZE E82EV113-4C200

LENZE EVS9324-ESV004

LENZE RS4-4E 520085

LENZE IPRK95/44L.21

LENZE EVS9326ES

LENZE E82EV152K2C

LENZE E82EV302K4C000

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.