JUSP-NS300-E YASKAWA

JUSP-NS300-E YASKAWA analog module

Product  Description：

Yaskawa Analog Modules are high-precision expansion components designed for the MP series machine controllers and Sigma series servo systems. These modules serve as the critical interface for signals that exist on a continuous spectrum rather than simple on/off states. They enable the control system to interact with the physical world by converting analog voltages or currents into digital data for the CPU (Analog Input) or converting digital commands into physical electrical signals (Analog Output).

Product Parameters

The technical performance of Yaskawa Analog Modules is defined by high-speed sampling and fine-grained resolution:

• Signal Range Compatibility: Supports standard industrial ranges including voltage (-10V to +10V DC, 0 to 10V DC) and current (4 to 20mA, 0 to 20mA).

• Resolution: High-bit depth conversion, typically 16-bit, which provides a digital value range of -31276 to +31276 or 0 to 65535 for extremely granular control.

• Channel Density: Available in configurations ranging from 2 to 8 channels per module to balance cost and space requirements.

• Conversion Speed: Optimized for high-speed motion environments, with sampling cycles as fast as 125 microseconds per channel.

• Input Impedance: High input impedance for voltage signals (typically 1 Megaohm) and low impedance for current signals (typically 250 Ohms) to maintain signal integrity.

• Accuracy: Precision-engineered with an overall accuracy of plus or minus 0.1 percent to 0.3 percent at room temperature.

Product Advantages

Yaskawa Analog Modules are preferred in high-end automation due to their superior signal processing capabilities:

• High-Speed Synchronization: These modules are designed to work in perfect sync with the MECHATROLINK motion network, ensuring that analog feedback reaches the motion engine without traditional PLC scan-time delays.

• Advanced Filtering: Built-in hardware and software filters allow for the removal of high-frequency noise and signal jitter, which is essential when measuring sensitive sensors near high-power motors.

• Intelligent Scaling: The module can be configured to automatically scale raw signals into engineering units like millimeters, kilograms, or degrees Celsius, reducing the programming burden on the main CPU.

• Channel Isolation: Features sophisticated electrical isolation between channels to prevent ground loops and ensure that a fault on one sensor does not affect the accuracy of others.

• Robust Diagnostics: Includes integrated detection for wire-breakage (open circuit) and over-range signals, providing immediate feedback to the controller to prevent machine damage.

Product Applications

These modules are used wherever precise measurement and variable control are required:

• Tension Control: Monitoring load cells and controlling powder brakes in winding and unwinding applications for paper, film, and textiles.

• Pressure and Flow Management: Interfacing with pressure transducers and controlling proportional valves in hydraulic or pneumatic systems.

• Temperature Regulation: Collecting data from thermocouples or RTD transmitters to manage heating elements in plastic extrusion or packaging lines.

• External Command Input: Receiving speed or torque references from external potentiometers or high-level supervisory controllers.

• Spindle Speed Control: Providing the variable voltage reference to secondary AC drives or spindles in CNC and metalworking machinery.

Important Precautions

To ensure maximum accuracy and prevent equipment failure, the following guidelines are vital:

• Shielding and Grounding: Always use shielded twisted-pair (STP) cables. The shield should be connected to the designated ground terminal on the module side only to avoid ground loop currents that distort readings.

• Wiring Separation: Keep analog cables in a separate conduit from high-voltage AC power lines and motor leads. A minimum distance of 200mm is recommended to prevent electromagnetic induction.

• Unused Channel Handling: To prevent fluctuating data caused by induced noise, short-circuit the positive and negative terminals of any unused voltage input channels.

• Signal Type Verification: Before applying power, double-check that the hardware switch settings or software parameters match the actual signal type (Voltage vs. Current). Applying a voltage source to a channel set for current can destroy the internal shunt resistor.

• Stabilization Period: For applications requiring the highest level of precision, allow the module to warm up for at least 30 minutes to ensure all internal components have reached thermal equilibrium.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

YASKAWA JAMSC-B1065

YASKAWA AK-BX410M

YASKAWA JAPMC-IO2304-T2

YASKAWA JAPMC-CM2302

YASKAWA YPHT31636-1C

YASKAWA CIMR-AA4A0005FAA

YASKAWA JEPMC-PC040

YASKAWA E131457

YASKAWA JUSP-OP02A-1

YASKAWA URX000256

YASKAWA CACR-IR3030CB

YASKAWA CIMR-VMS2030

YASKAWA SGM7J-08A7A6S

YASKAWA SGDH-1EAE

YASKAWA CIMR-MR5A2030

YASKAWA SGDA-04AP

YASKAWA SGM-04A312

YASKAWA JEPMC-PAS3012-E

YASKAWA JEPMC-BU2200-E

YASKAWA 2181F-01

YASKAWA JEPMC-REP2000-E

YASKAWA PS-02

YASKAWA CIMR-VC4A0004BAA

YASKAWA SGDV-7R6A11A

YASKAWA YPHT31624_1D

YASKAWA SGMGV-20ADA61

YASKAWA SGDV180A11A

YASKAWA SGMGV-55ADA61

YASKAWA CIMR-VU2A0020FAA

YASKAWA CIMR-VU2A0012FAA

YASKAWA CIMR-VU2A0006FAA

YASKAWA CIMR-VC4A0011BAA

YASKAWA SGDV-210D11A

YASKAWA CIMR-AT4A0031FAA

YASKAWA SGMGV09ADC61

YASKAWA SGMSH-50ACA61

YASKAWA VZA41P5BAA

YASKAWA PS-02 JACP-317121

YASKAWA SGM-08V312

YASKAWA SGD7S-2R8A20A

YASKAWA SGDV-170D11A020000

YASKAWA SGMRV-37ANA-YR12

YASKAWA SGMRV-13ANA-YR21

YASKAWA CIMR-G7A45P5

YASKAWA SGDS-30A12A

YASKAWA SGMG-1AA2AB

YASKAWA CIMR-G7A4015

YASKAWA YPHT31600-1D

YASKAWA SGDV-1R6A01A

YASKAWA SGM7J-02AFA61-200W

YASKAWA SGD7S-1R6A20A

YASKAWA JEPMC-W6012-A5-E-MIII

YASKAWA SGD7S-330A

YASKAWA SGMAV-04A3A61

YASKAWA 972-ODP10

YASKAWA SGD7S-7R6A

YASKAWA JAMSC-120DDI35400

YASKAWA YPCT31200-1C

YASKAWA SJME-08AMB41

YASKAWA AK-BX410M

YASKAWA SGMSH-15D2A6E-OY

YASKAWA CIMR-JCBA0003BAA

YASKAWA 73600-A0151

YASKAWA CACR-SR15BB1BM

YASKAWA SGMG-09A2AB

YASKAWA PMC-U-MP23S16

YASKAWA CACR-PR10BC3CSY10

YASKAWA JACP-317803

YASKAWA JACP-317800

YASKAWA H3Y-4DC

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.