JASP-WRCA01B YASKAWA

JASP-WRCA01B YASKAWA Output Module

Product  Description：

Yaskawa Output Modules are high-performance interface components designed for the MP (Machine Controller) series. These modules act as the execution interface for the controller, converting the digital logic commands from the CPU into electrical signals that drive field devices. Whether controlling simple indicator lights or high-frequency solenoid valves, Yaskawa output modules are engineered to provide the timing precision required for high-speed motion control environments.

Product Parameters

The technical specifications of Yaskawa output modules are optimized for industrial reliability and rapid response:

• Output Point Density: Commonly available in 16-point, 32-point, and 64-point configurations to maximize control cabinet space.

• Output Types: Available in Transistor (Sinking or Sourcing) for high-speed switching, and Relay types for high-capacity or isolated AC/DC switching.

• Rated Load Voltage: Transistor modules typically handle 12V to 24V DC, while relay modules can manage up to 240V AC or 30V DC.

• Maximum Load Current: Varies from 0.1A per point for high-density transistor modules to 2.0A per point for relay-based modules.

• Response Time: Fast-acting transistor outputs feature "off-to-on" and "on-to-off" times of less than 0.1 milliseconds, which is critical for precision timing.

• External Power Supply: Requires a dedicated 24V DC supply for the output stage to ensure clean signal isolation from the internal PLC logic.

• Protection Mechanisms: Many transistor models include built-in electronic short-circuit protection and thermal overload shutdown.

Product Advantages

Yaskawa output modules offer several distinct advantages for machine builders and end-users:

• High-Speed Performance: The minimal propagation delay of these modules ensures that high-speed actuators and valves respond in perfect synchronization with the motion controller's CPU cycle.

• Robust Galvanic Isolation: Uses high-quality optocouplers to isolate the internal controller circuitry from field-side electrical noise and voltage spikes, preventing system-wide damage.

• Maintenance-Friendly Design: Features removable terminal blocks on many models, allowing for quick module replacement without the need to disconnect individual field wires.

• Status Visibility: Every output point is equipped with an individual LED indicator on the front panel, enabling technicians to immediately verify if the controller is sending a signal to the field.

• Flexible Common Configurations: Modules are often divided into multiple common groups (e.g., 8 points per common), allowing a single module to switch different voltage levels or power sources.

Product Applications

These modules are used to drive a wide variety of actuators in automated machinery:

• Solenoid Valve Control: Driving pneumatic or hydraulic valves in high-speed sorting, stamping, and material handling systems.

• Motor Starter Interfacing: Providing the "start/stop" signals to contactors and motor starters in industrial pumping and ventilation systems.

• Alarm and Signal Notification: Controlling stack lights, sirens, and HMI status indicators to provide real-time feedback to machine operators.

• Clutch and Brake Control: Managing the engagement of mechanical clutches and brakes in printing presses and textile machinery.

• Heater Control: Interfacing with solid-state relays (SSRs) to regulate heating elements in plastic injection molding machines and industrial ovens.

Important Precautions

To ensure safe operation and prevent hardware failure, the following precautions must be followed:

• Inductive Load Protection: When driving inductive loads like solenoids or relays with transistor outputs, always install an external flyback diode (for DC) or surge suppressor (for AC) to prevent back-EMF from destroying the output transistor.

• Current Limit Adherence: Never exceed the total current rating for the "common" terminal. Even if individual points are within limits, the sum of all simultaneous outputs must not exceed the module's common capacity.

• Wiring Polarity: For transistor sink-type modules, the load must be connected between the output terminal and the positive power supply. For source-type, the load goes between the output and the common (negative).

• Fuse Installation: It is highly recommended to install an external fuse for each common group to protect the module's internal traces in the event of a field-side short circuit.

• Heat Management: When using high-density modules (64 points) with high "on" ratios, ensure the control cabinet has adequate airflow to prevent the module from overheating.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

YASKAWA JAMSC-B1065

YASKAWA AK-BX410M

YASKAWA JAPMC-IO2304-T2

YASKAWA JAPMC-CM2302

YASKAWA YPHT31636-1C

YASKAWA CIMR-AA4A0005FAA

YASKAWA JEPMC-PC040

YASKAWA E131457

YASKAWA JUSP-OP02A-1

YASKAWA URX000256

YASKAWA CACR-IR3030CB

YASKAWA CIMR-VMS2030

YASKAWA SGM7J-08A7A6S

YASKAWA SGDH-1EAE

YASKAWA CIMR-MR5A2030

YASKAWA SGDA-04AP

YASKAWA SGM-04A312

YASKAWA JEPMC-PAS3012-E

YASKAWA JEPMC-BU2200-E

YASKAWA 2181F-01

YASKAWA JEPMC-REP2000-E

YASKAWA PS-02

YASKAWA CIMR-VC4A0004BAA

YASKAWA SGDV-7R6A11A

YASKAWA YPHT31624_1D

YASKAWA SGMGV-20ADA61

YASKAWA SGDV180A11A

YASKAWA SGMGV-55ADA61

YASKAWA CIMR-VU2A0020FAA

YASKAWA CIMR-VU2A0012FAA

YASKAWA CIMR-VU2A0006FAA

YASKAWA CIMR-VC4A0011BAA

YASKAWA SGDV-210D11A

YASKAWA CIMR-AT4A0031FAA

YASKAWA SGMGV09ADC61

YASKAWA SGMSH-50ACA61

YASKAWA VZA41P5BAA

YASKAWA PS-02 JACP-317121

YASKAWA SGM-08V312

YASKAWA SGD7S-2R8A20A

YASKAWA SGDV-170D11A020000

YASKAWA SGMRV-37ANA-YR12

YASKAWA SGMRV-13ANA-YR21

YASKAWA CIMR-G7A45P5

YASKAWA SGDS-30A12A

YASKAWA SGMG-1AA2AB

YASKAWA CIMR-G7A4015

YASKAWA YPHT31600-1D

YASKAWA SGDV-1R6A01A

YASKAWA SGM7J-02AFA61-200W

YASKAWA SGD7S-1R6A20A

YASKAWA JEPMC-W6012-A5-E-MIII

YASKAWA SGD7S-330A

YASKAWA SGMAV-04A3A61

YASKAWA 972-ODP10

YASKAWA SGD7S-7R6A

YASKAWA JAMSC-120DDI35400

YASKAWA YPCT31200-1C

YASKAWA SJME-08AMB41

YASKAWA AK-BX410M

YASKAWA SGMSH-15D2A6E-OY

YASKAWA CIMR-JCBA0003BAA

YASKAWA 73600-A0151

YASKAWA CACR-SR15BB1BM

YASKAWA SGMG-09A2AB

YASKAWA PMC-U-MP23S16

YASKAWA CACR-PR10BC3CSY10

YASKAWA JACP-317803

YASKAWA JACP-317800

YASKAWA H3Y-4DC

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.