JASP-WCCA162 YASKAWA

JASP-WCCA162 YASKAWA Termination Unit

Product  Description：

The Yaskawa Termination Unit is a specialized hardware component designed to facilitate the organized and secure connection of field wiring to Yaskawa’s motion controllers and PLC systems. Primarily utilized within the MP (Machine Controller) and Sigma-7 series ecosystems, these units serve as an interface bridge. They simplify the transition from high-density, multi-pin connectors on the controller side to easy-to-use screw or spring-clamp terminals for external sensors, actuators, and power supplies.

Product Parameters

While specific parameters depend on whether the unit is for digital I/O, analog signals, or motion networking, common technical specifications include:

• Rated Voltage: Typically supports 24V DC for industrial logic, with some units rated for up to 125V AC/DC depending on the relay or terminal type.

• Current Capacity: Rated for approximately 0.5A to 2.0A per point, with a maximum cumulative current limit for the entire block.

• Terminal Type: Available in traditional M3 screw terminals for secure ring-lug connections or tension-clamp (push-in) styles for rapid, vibration-resistant wiring.

• Connection Density: Offered in various configurations including 16, 20, 32, or 40-pin connector interfaces to match the controller’s port density.

• Insulation Resistance: Usually specified at 100M Ohms or higher (at 500V DC) to ensure signal integrity and safety.

• Mounting Method: Standard 35mm DIN rail mounting for easy integration into industrial control panels.

Product Advantages

Yaskawa Termination Units offer significant engineering and maintenance benefits:

• Simplified Wiring: These units eliminate the need for manual soldering or complex crimping of high-density connectors, significantly reducing the labor hours required for machine assembly.

• Enhanced Maintenance: Since the unit separates the field wiring from the controller, a faulty controller can be replaced without disconnecting individual field wires, reducing "Mean Time to Repair" (MTTR).

• Signal Integrity: Integrated shielding plates and grounding terminals help minimize electromagnetic interference (EMI), which is critical for maintaining high-precision analog and motion signals.

• Space Efficiency: The compact, vertical design allows for high-density wiring within a small footprint, helping to reduce the overall size of the electrical control cabinet.

• Visual Diagnostics: Many units include built-in LED indicators for each I/O point, allowing technicians to verify the status of field devices at a glance without using a multimeter.

Product Applications

These units are essential in any environment utilizing Yaskawa motion control architecture:

• Servo System Integration: Connecting feedback signals and control commands between an MP3000 controller and multiple Sigma-7 servo drives.

• Robotic Workcells: Managing the distributed I/O for robotic end-effectors, safety sensors, and conveyor interlocks.

• CNC Machinery: Interfacing the central control unit with limit switches, spindle sensors, and operator control station buttons.

• Automated Assembly Lines: Organizing the vast amount of sensor data required for high-speed pick-and-place and sorting systems.

• Process Automation: Providing a secure termination point for temperature probes and pressure transducers in industrial heating or cooling systems.

Important Precautions

To ensure a safe and reliable installation, the following precautions must be followed:

• Cable Length Limits: When using termination units for high-speed signals or analog inputs, keep the interface cable between the controller and the termination unit as short as possible to prevent signal degradation.

• Torque Specifications: For screw-type terminals, always adhere to the manufacturer's specified torque settings. Over-tightening can strip the threads, while under-tightening can lead to arc-faults or intermittent connections.

• Wiring Separation: Do not run signal wires connected to the termination unit in the same duct as high-voltage AC power lines. Maintain a minimum clearance of 100mm to avoid inductive noise.

• Correct Polarity: Double-check the polarity of the common (COM) terminals. Incorrect wiring can lead to a short circuit that may damage both the termination unit and the connected I/O module.

• Environmental Sealing: If the unit is used in an environment with conductive dust or oil mist, it must be housed in an appropriately rated (IP54 or higher) enclosure to prevent tracking or short circuits between terminals.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

YASKAWA JAMSC-B1065

YASKAWA AK-BX410M

YASKAWA JAPMC-IO2304-T2

YASKAWA JAPMC-CM2302

YASKAWA YPHT31636-1C

YASKAWA CIMR-AA4A0005FAA

YASKAWA JEPMC-PC040

YASKAWA E131457

YASKAWA JUSP-OP02A-1

YASKAWA URX000256

YASKAWA CACR-IR3030CB

YASKAWA CIMR-VMS2030

YASKAWA SGM7J-08A7A6S

YASKAWA SGDH-1EAE

YASKAWA CIMR-MR5A2030

YASKAWA SGDA-04AP

YASKAWA SGM-04A312

YASKAWA JEPMC-PAS3012-E

YASKAWA JEPMC-BU2200-E

YASKAWA 2181F-01

YASKAWA JEPMC-REP2000-E

YASKAWA PS-02

YASKAWA CIMR-VC4A0004BAA

YASKAWA SGDV-7R6A11A

YASKAWA YPHT31624_1D

YASKAWA SGMGV-20ADA61

YASKAWA SGDV180A11A

YASKAWA SGMGV-55ADA61

YASKAWA CIMR-VU2A0020FAA

YASKAWA CIMR-VU2A0012FAA

YASKAWA CIMR-VU2A0006FAA

YASKAWA CIMR-VC4A0011BAA

YASKAWA SGDV-210D11A

YASKAWA CIMR-AT4A0031FAA

YASKAWA SGMGV09ADC61

YASKAWA SGMSH-50ACA61

YASKAWA VZA41P5BAA

YASKAWA PS-02 JACP-317121

YASKAWA SGM-08V312

YASKAWA SGD7S-2R8A20A

YASKAWA SGDV-170D11A020000

YASKAWA SGMRV-37ANA-YR12

YASKAWA SGMRV-13ANA-YR21

YASKAWA CIMR-G7A45P5

YASKAWA SGDS-30A12A

YASKAWA SGMG-1AA2AB

YASKAWA CIMR-G7A4015

YASKAWA YPHT31600-1D

YASKAWA SGDV-1R6A01A

YASKAWA SGM7J-02AFA61-200W

YASKAWA SGD7S-1R6A20A

YASKAWA JEPMC-W6012-A5-E-MIII

YASKAWA SGD7S-330A

YASKAWA SGMAV-04A3A61

YASKAWA 972-ODP10

YASKAWA SGD7S-7R6A

YASKAWA JAMSC-120DDI35400

YASKAWA YPCT31200-1C

YASKAWA SJME-08AMB41

YASKAWA AK-BX410M

YASKAWA SGMSH-15D2A6E-OY

YASKAWA CIMR-JCBA0003BAA

YASKAWA 73600-A0151

YASKAWA CACR-SR15BB1BM

YASKAWA SGMG-09A2AB

YASKAWA PMC-U-MP23S16

YASKAWA CACR-PR10BC3CSY10

YASKAWA JACP-317803

YASKAWA JACP-317800

YASKAWA H3Y-4DC

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.