JANCD-XIF04-1DF0200055-A0S YASKAWA

JANCD-XIF04-1DF0200055-A0S YASKAWA Servo Controller

Product  Description：

Yaskawa Servo Controllers, notably the Sigma-7 and Sigma-X series, are high-precision electronic devices designed to command and regulate the operation of servo motors. They act as the power amplifier and processing hub that translates low-level control signals into high-power electrical current to achieve exact control over position, velocity, and torque. By utilizing advanced tuning algorithms and high-speed communication, Yaskawa controllers ensure that mechanical systems move with maximum efficiency and minimal vibration.

Product Parameters

The technical performance of a Yaskawa Servo Controller is defined by its power handling and feedback resolution:

• Input Power Supply: Supports a wide range of voltages including Single-phase 100-120V, Single/Three-phase 200-240V, and Three-phase 380-480V AC.

• Rated Output Power: Scalable across a vast range from small 50W units for delicate electronics to high-capacity 55kW units for heavy industrial machinery.

• Feedback Resolution: Compatible with high-resolution 24-bit absolute encoders, providing over 16 million pulses per revolution for extreme positioning accuracy.

• Speed Frequency Response: High-speed processing capabilities with frequency responses often reaching 3.1 kHz, allowing the system to react almost instantaneously to command changes.

• Communication Protocols: Features integrated support for MECHATROLINK-III, MECHATROLINK-4, EtherCAT, and traditional Analog/Pulse train interfaces.

• Overload Capacity: Typically designed to handle up to 300 percent of the rated current for short durations (usually 3 seconds) to facilitate rapid acceleration and deceleration.

Product Advantages

Yaskawa Servo Controllers are industry leaders due to several proprietary technological innovations:

• Advanced Autotuning: Features "Tuningless" technology that allows the system to operate immediately without manual adjustment, as well as sophisticated autotuning that compensates for load changes in real-time.

• Vibration Suppression: Equipped with advanced filters that automatically detect and eliminate mechanical resonance and end-of-arm vibration, protecting the machine and improving part quality.

• Energy Efficiency: Utilizes high-efficiency power modules and regenerative energy processing to minimize power consumption and heat generation.

• Functional Safety: Integrated safety features such as Safe Torque Off (STO) to meet international safety standards (SIL3/PLe) without the need for additional external contactors.

• Extreme Precision: The high-resolution feedback loop ensures that following errors are minimized, which is critical for synchronized multi-axis motion and high-speed contouring.

Product Applications

These controllers are utilized in any application requiring high-speed, repeatable, and precise movement:

• Semiconductor and Electronics: Used in wafer handling, pick-and-place component mounting, and high-speed wire bonding machines.

• Robotics: Serving as the drive system for 6-axis industrial robots, collaborative robots (cobots), and Automated Guided Vehicles (AGVs).

• Machine Tools: Driving the axes of CNC milling machines, lathes, and laser cutters where micron-level accuracy is mandatory.

• Packaging and Food Processing: Managing high-speed vertical form fill seal (VFFS) machines, labeling systems, and rotary cutters.

• Printing and Converting: Controlling tension and registration in high-speed web printing presses and paper slitting machines.

Important Precautions

To ensure the safety of personnel and the longevity of the hardware, observe the following precautions:

• Correct Wiring and Phase: Ensure that the U, V, and W power leads to the motor are connected in the correct sequence. Incorrect wiring will cause the motor to run out of control or trigger an instantaneous alarm.

• Heat Dissipation: Servo controllers generate heat during operation. Always maintain the specified clearance between units in the control panel and ensure that cooling fans are not obstructed.

• Residual Voltage Warning: Even after the power is turned off, the internal capacitors remain charged with high voltage. Wait at least 5 to 10 minutes (or until the "Charge" LED is completely off) before touching the terminals.

• Regenerative Resistor Protection: When the motor decelerates quickly, it generates energy back to the controller. If the internal capacity is exceeded, an external regenerative resistor must be installed and correctly configured in the parameters to prevent overvoltage.

• Noise Mitigation: Use shielded cables for encoder feedback and control signals. Ensure the shield is properly grounded to the drive frame to prevent electromagnetic interference (EMI) from causing position errors or communication failures.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

YASKAWA JAMSC-B1065

YASKAWA AK-BX410M

YASKAWA JAPMC-IO2304-T2

YASKAWA JAPMC-CM2302

YASKAWA YPHT31636-1C

YASKAWA CIMR-AA4A0005FAA

YASKAWA JEPMC-PC040

YASKAWA E131457

YASKAWA JUSP-OP02A-1

YASKAWA URX000256

YASKAWA CACR-IR3030CB

YASKAWA CIMR-VMS2030

YASKAWA SGM7J-08A7A6S

YASKAWA SGDH-1EAE

YASKAWA CIMR-MR5A2030

YASKAWA SGDA-04AP

YASKAWA SGM-04A312

YASKAWA JEPMC-PAS3012-E

YASKAWA JEPMC-BU2200-E

YASKAWA 2181F-01

YASKAWA JEPMC-REP2000-E

YASKAWA PS-02

YASKAWA CIMR-VC4A0004BAA

YASKAWA SGDV-7R6A11A

YASKAWA YPHT31624_1D

YASKAWA SGMGV-20ADA61

YASKAWA SGDV180A11A

YASKAWA SGMGV-55ADA61

YASKAWA CIMR-VU2A0020FAA

YASKAWA CIMR-VU2A0012FAA

YASKAWA CIMR-VU2A0006FAA

YASKAWA CIMR-VC4A0011BAA

YASKAWA SGDV-210D11A

YASKAWA CIMR-AT4A0031FAA

YASKAWA SGMGV09ADC61

YASKAWA SGMSH-50ACA61

YASKAWA VZA41P5BAA

YASKAWA PS-02 JACP-317121

YASKAWA SGM-08V312

YASKAWA SGD7S-2R8A20A

YASKAWA SGDV-170D11A020000

YASKAWA SGMRV-37ANA-YR12

YASKAWA SGMRV-13ANA-YR21

YASKAWA CIMR-G7A45P5

YASKAWA SGDS-30A12A

YASKAWA SGMG-1AA2AB

YASKAWA CIMR-G7A4015

YASKAWA YPHT31600-1D

YASKAWA SGDV-1R6A01A

YASKAWA SGM7J-02AFA61-200W

YASKAWA SGD7S-1R6A20A

YASKAWA JEPMC-W6012-A5-E-MIII

YASKAWA SGD7S-330A

YASKAWA SGMAV-04A3A61

YASKAWA 972-ODP10

YASKAWA SGD7S-7R6A

YASKAWA JAMSC-120DDI35400

YASKAWA YPCT31200-1C

YASKAWA SJME-08AMB41

YASKAWA AK-BX410M

YASKAWA SGMSH-15D2A6E-OY

YASKAWA CIMR-JCBA0003BAA

YASKAWA 73600-A0151

YASKAWA CACR-SR15BB1BM

YASKAWA SGMG-09A2AB

YASKAWA PMC-U-MP23S16

YASKAWA CACR-PR10BC3CSY10

YASKAWA JACP-317803

YASKAWA JACP-317800

YASKAWA H3Y-4DC

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.