GST06-2AVCR-17NC35 LENZE

GST06-2AVCR-17NC35 analog module

Product  Description：

Lenze analog modules, designed as critical expansion blocks for the Lenze I/O system 1000, 8400 series, and modular servo systems like the i950 cabinet inverter, serve as high-performance interfaces for continuous, variable signals. These modules translate physical quantities from external field sensors into digital data for the controller (Analog-to-Digital), or convert internal digital commands into variable voltages and currents to regulate downstream actuators (Digital-to-Analog). Focused on precise execution, these modules optimize the synchronization of dynamic speed, pressure, and torque adjustments.

Product Parameters

The technical baseline of a Lenze analog module highlights rapid processing speeds and adaptable signal standardizations:

• Signal Configurations: Fully selectable channel types supporting voltage ranges of 0 to 10V DC, -10V to +10V DC, and current ranges of 0 to 20mA or 4 to 20mA.

• Conversion Resolution: Equipped with high-accuracy 12-bit to 16-bit resolution formats to capture or emit highly precise physical increments.

• Density Profiles: Compact form factors available in 2-channel, 4-channel, or 8-channel modules supporting up to 12.5mm slice widths on a standard rail.

• Processing and Cycle Time: Fast processing speeds featuring multi-channel conversion times down to 2 milliseconds or faster for rapid signal synchronization.

• Isolation Architecture: Built-in galvanic isolation typically rated up to 75V DC or 500V AC to isolate field process circuits from the internal communication backplane.

• Input/Output Impedance: Voltage input channels operate at a minimum internal resistance of 100 Kilohms, while current output circuits support minimum load impedances of 5 Kilohms.

Product Advantages

Lenze analog modules provide exceptional machine performance and field management advantages:

• Modular Space Efficiency: The ultra-compact physical slice design allows machine builders to stack numerous analog channels side-by-side, reducing overall control cabinet footprint.

• Advanced Signal Pre-processing: Integrated onboard diagnostics handle data filtering, linear scaling, and peak value retention directly on the module, offloading computing tasks from the primary drive controller.

• Dynamic Interference Suppression: High common-mode rejection and sophisticated software averaging effectively eliminate high-frequency electrical noise generated by adjacent motor lines.

• Fast Integration and Diagnosis: Seamless pairing with the Lenze EASY Starter engineering tool allows for quick parameter assignment without traditional ladder logic adjustments. Built-in per-channel fault LEDs immediately signal short-circuits or out-of-bounds metrics.

• Safe Failure States: Configurable behavior options permit channels to maintain their last valid signal or drop to a safe substitute value (e.g., 0V) during a system communication failure.

Product Applications

These analog modules are critical elements in complex packaging, intralogistics, and machine-tool control networks:

• Tension and Winder Regulation: Connecting to load cells and dancer arms in textile or printing machinery to maintain continuous web tension.

• Speed and Torque Cascading: Providing high-accuracy 0-10V analog references to slave frequency inverters or servo drives in large conveyor configurations.

• Process Variable Tracking: Capturing temperature indicators, fluid flow metrics, and barometric readings in food pasteurization or chemical blending loops.

• Proportional Valve Management: Modulating precise current loops to regulate hydraulic and pneumatic proportional valves on metal forming machines.

• Spindle and Auxiliary Synchronization: Supplying dynamic speed adjustments to auxiliary axes and rotary tools on automated CNC lines.

Important Precautions

To guarantee safe application and sustain measurement precision, the following operation conditions must be observed:

• Shielding and Equipotential Bonding: Always use low-capacitance, shielded twisted-pair cabling for all analog lines. Ground the shield at one end to the cabinet grounding bar to eliminate ground loop current interferences.

• Inductive Cable Separation: Ensure that analog signal pathways maintain a physical distance of at least 100mm to 200mm from high-voltage AC lines, motor leads, and brake resistors.

• Loop Integrity Check: When configuring current inputs for 4-20mA devices, establish line-break verification rules in the software to safely respond to unexpected field wire detachments.

• Live-Insertion Limits: Never remove or plug the analog slice module into the system backplane while the rack or terminal block is electrically energized, as this can cause permanent electrical damage to internal microprocessors.

• Unused Channel Termination: To prevent fluctuating digital values caused by floating atmospheric charges, unused voltage channels should be short-circuited or explicitly disabled via the system software settings.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

LENZE EVS9325-EK

LENZE EVS9328-ESV004

LENZE GFQUTA100-22

LENZE GST05-2SVCK

LENZE MCA17N41-RS0B0

LENZE MDFKARS090-22

LENZE MDXMA2M080-12

LENZE PM2-500V

LENZE SDSGAXX056-22

LENZE VDE0530

LENZE 4/9916/0714

LENZE EVD533E

LENZE MDSKSRS-036-13

LENZE E94ASHE0134

LENZE EVD4907-E

LENZE EVF8601-E

LENZE EVF8602-E

LENZE EVF8603-E

LENZE EVF8609-E-V005

LENZE EVF9328-EV

LENZE EVS-9223-E

LENZE EVS9321-ETV907

LENZE EVS9327-EP

LENZE EVS9328-ES

LENZE EVS9328-KHV531

LENZE EVS9331-EK

LENZE E94AFHB-001

LENZE EVS9327-ESV004

LENZE EVF8222-E

LENZE MDSKABS071-22

LENZE MDSKAAG056-22

LENZE EVS9328-EI

LENZE E82EV371_2C200

LENZE DRA60-24A

LENZE EPL-10200-XX

LENZE E84AYCECV/S

LENZE EVS9321-EP

LENZE E82EV551-K4C

LENZE E82EV751-K2C200

LENZE RS4-4E

LENZE RS4-2E

LENZE ESMD152L4TXA

LENZE E82EV551-4C200

LENZE E82EV113-4C200

LENZE EVS9324-ESV004

LENZE RS4-4E 520085

LENZE IPRK95/44L.21

LENZE EVS9326ES

LENZE E82EV152K2C

LENZE E82EV302K4C000

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.