GS2-41P0 Automation Direct

Automation Direct GS2-41P0 Ac Vfd Drive

Product  Description：

Improper installation of the AC drive will greatly reduce its life. Be sure to observe

the following precautions when selecting a mounting location:

• Do not mount the AC drive near heat-radiating elements or in direct sunlight. 

• Do not install the AC drive in a place subjected to high temperature, high humidity,

excessive vibration, corrosive gases or liquids, or airborne dust or metallic particles.

• Mount the AC drive securely on a flat, rigid, non-flammable surface.

• Mount the AC drive vertically and do not restrict the air flow to the heat sink fins.

Wiring Notes: PLEASE READ PRIOR TO INSTALLATION.

1. During installation, follow all local electrical, construction, and safety codes for

the country in which the AC drive is to be installed.

2. Make sure the appropriate circuit protective devices (circuit breaker or fuses)

are connected between the power supply and AC drive.

3. Make sure that the leads are connected correctly and the AC drive is properly

grounded. (Ground resistance should not exceed 0.1
.)

4. Use ground leads that comply with AWG/MCM standards and keep them as

short as possible.

5. Do not use a power circuit contactor or disconnect switch for run/stop control

of the AC drive and motor. This will reduce the operating life cycle of the AC

drive. Cycling a power circuit switching device while the AC drive is in run

mode should be done only in emergency situations.

6. Multiple GS2 units can be installed in one location. All of the units should be

grounded directly to a common ground terminal, or connected in parallel, as

shown in the figure below. Make sure there are no ground loops.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

WEIDMULLER RCI314AC4

WEIDMULLER PAC-UNIV-HE20-LCH-2M

WEIDMULLER 8533640000

WEIDMULLER RCM570024

WEIDMULLER 1469480000

VMIC VMIPMC-5565

Klaxon SLC-0002

Lantronix XSDRIN-03

Gent 13270-02LB

Gent 13270-04LB

Baumuller BUM616-12/18-31-R-0100-A009-01

Baumuller BM5332-SG02-0101-0128-00-A114-E80

Baumuller BM5332-SG02-0101-0128-00 A114-E80

Baumuller BUS21-30/80-31-020

Baumuller BUG2-60-30-B-004

Baumuller BUS6-MC-00-S000-3051-SI00-0000

Baumuller BUS6-MC-00-S000-SI00-0000

TRACOPOWER TCL060-124

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. Xiamen Rongfeng Electrical Equipment Co., Ltd. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of Xiamen Rongfeng Electrical Equipment Co., Ltd. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.