EVS9323-EPV004 LENZE

EVS9323-EPV004 Output Module

Product  Description：

Lenze output modules are high-performance industrial automation components designed to interface a central controller, such as a Lenze PLC or automation system, with various field-level actuators. These modules convert digital or analog control commands from the system backplane into electrical signals capable of driving valves, solenoids, contactors, indicators, or speed references. Built to integrate seamlessly within the Lenze c500, i700, or I/O system 1000 architectures, these modules ensure rapid, precise control in highly dynamic motion and machine control applications.

Product Parameters

The technical configuration of Lenze output modules varies depending on whether they handle discrete or continuous signals, but generally feature the following specifications:

• Channel Density: Available in flexible configurations, typically providing 4, 8, or 16 channels per module to balance space and wiring complexity.

• Output Signal Types: Offered in digital DC variants (typically 24V DC transistor outputs), digital AC variants (relay contacts), and analog variants (0-10V voltage or 4-20mA current outputs).

• Rated Output Current: Digital transistor outputs typically support 0.5A to 2A per channel, while relay outputs can handle higher current capacity for switching auxiliary loads.

• Output Resolution: Analog output modules feature high-resolution digital-to-analog conversion, typically 12-bit to 16-bit, ensuring smooth target value transmission.

• Switching Frequency: Fast response times for digital outputs, with switching frequencies optimized for rapid cycling in electronic cams and high-speed sorting.

• Fieldbus Compatibility: Fully integrated with high-performance backplane buses supporting EtherCAT, PROFINET, or CANopen protocols.

Product Advantages

Lenze output modules provide several distinct operational benefits that enhance machine productivity and response times:

• High-Speed Synchronicity: When paired with EtherCAT-based Lenze controllers, these modules support distributed clocks, ensuring that output signals are executed with microsecond-level synchronization across the entire machine.

• Compact Modular Design: The slim physical profile saves valuable space inside the electrical control cabinet, allowing for high I/O density in a small footprint.

• Comprehensive Diagnostics: Integrated short-circuit, overload, and open-load detection mechanisms provide real-time feedback to the central CPU, shortening diagnostic routines.

• Tool-Free Installation: Many Lenze I/O systems utilize push-in tension clamp terminal blocks, which drastically reduce wiring time and prevent wire loosening in high-vibration applications.

• Robust Galvanic Isolation: Internal logic circuits are electronically isolated from the field-side power supply, protecting sensitive controller electronics from external electrical faults.

Product Applications

These modules are widely used in motion-centric machinery where rapid execution of output commands is critical:

• Packaging Machinery: Driving high-speed pneumatic valves, sealing jaws, and sorting gates in form-fill-seal and wrapping machines.

• Material Handling: Controlling directional diverters, stop gates, and signaling beacons along automated conveyor systems and warehouse distribution lines.

• Textile Production: Providing precise analog speed references to auxiliary drives or activating actuators in synchronized weaving and spinning equipment.

• Robotics and Assembly: Interfacing with end-of-arm tooling, grippers, and indexing tables within automated production cells.

• Printing and Paper Converting: Actuating tension control valves, web guides, and ink feed regulators that require continuous, smooth adjustment.

Important Precautions

To guarantee safe operation and protect the output hardware from premature failure, the following precautions must be observed:

• Inductive Load Protection: When connecting inductive loads such as mechanical relays, solenoids, or motor brakes to digital transistor outputs, always install recovery diodes or surge suppressors to prevent high back-EMF voltage spikes from destroying the output transistors.

• External Power Sourcing: Ensure that the external 24V DC field power supply used to drive the outputs is properly regulated and fused. Exceeding the maximum voltage rating will cause permanent thermal damage to the module.

• Total Current Limitations: Do not exceed the maximum current limit allowed for the entire module common. Even if individual channels are within their limits, running all channels at maximum capacity simultaneously can overload the module's power bus.

• Power-Off Configuration: Always switch off the main system and field power supplies before inserting, removing, or wiring the module to prevent electrical arcing and communication dropouts on the active backplane.

• Unused Channel Insulation: Ensure that wire strands from unused output channels are safely insulated and not left floating, as accidental short circuits to ground can trigger internal overcurrent protection trips.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

LENZE EVS9325-EK

LENZE EVS9328-ESV004

LENZE GFQUTA100-22

LENZE GST05-2SVCK

LENZE MCA17N41-RS0B0

LENZE MDFKARS090-22

LENZE MDXMA2M080-12

LENZE PM2-500V

LENZE SDSGAXX056-22

LENZE VDE0530

LENZE 4/9916/0714

LENZE EVD533E

LENZE MDSKSRS-036-13

LENZE E94ASHE0134

LENZE EVD4907-E

LENZE EVF8601-E

LENZE EVF8602-E

LENZE EVF8603-E

LENZE EVF8609-E-V005

LENZE EVF9328-EV

LENZE EVS-9223-E

LENZE EVS9321-ETV907

LENZE EVS9327-EP

LENZE EVS9328-ES

LENZE EVS9328-KHV531

LENZE EVS9331-EK

LENZE E94AFHB-001

LENZE EVS9327-ESV004

LENZE EVF8222-E

LENZE MDSKABS071-22

LENZE MDSKAAG056-22

LENZE EVS9328-EI

LENZE E82EV371_2C200

LENZE DRA60-24A

LENZE EPL-10200-XX

LENZE E84AYCECV/S

LENZE EVS9321-EP

LENZE E82EV551-K4C

LENZE E82EV751-K2C200

LENZE RS4-4E

LENZE RS4-2E

LENZE ESMD152L4TXA

LENZE E82EV551-4C200

LENZE E82EV113-4C200

LENZE EVS9324-ESV004

LENZE RS4-4E 520085

LENZE IPRK95/44L.21

LENZE EVS9326ES

LENZE E82EV152K2C

LENZE E82EV302K4C000

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.