EVF9326-EV LENZE

EVF9326-EV  LENZE Gate Module

Product  Description：

Lenze Gate Modules, frequently integrated within high-performance servo drives, frequency inverters, and power supply units (such as the i500, i700, or 9400 series), function as the critical switching interface between low-voltage control electronics and high-power semiconductors. These modules receive logic-level pulse-width modulation (PWM) signals from the central processing unit and amplify them into the high-current, isolated pulses required to rapidly charge and discharge the gates of IGBTs or MOSFETs. They ensure highly efficient power conversion while safeguarding the master controller from high-voltage feedback.

Product Parameters

The technical characteristics of Lenze Gate Modules focus on switching dynamics, insulation integrity, and driving capability:

• Peak Output Current: Delivers high transient gate currents, typically ranging from 2A to 8A, enabling ultra-fast turn-on and turn-off times for power transistors.

• Gate Voltage Levels: Standard output swings generally feature positive voltages around 15V for optimal saturation and negative voltages between -5V and -10V for reliable turn-off against noise.

• Galvanic Isolation Strength: Implements robust isolation barriers, typically rated between 2500V and 4000V AC for 1 minute, isolating the control backplane from the high-voltage DC bus.

• Propagation Delay Time: Highly deterministic signal transmission with typical delays below 200 nanoseconds, ensuring accurate timing synchronization in multi-axis setups.

• Operating Frequency Range: Engineered to support high-frequency PWM switching operations, commonly ranging from 2 kHz up to 16 kHz or higher.

• Logic Input Levels: Compatible with standard 3.3V or 5V CMOS/TTL logic levels directly from the motion controller or microcontroller.

Product Advantages

Lenze Gate Modules provide significant technological benefits designed to optimize motor drive dynamics and system lifespan:

• Low Switching Losses: By optimizing the gate charging profile, these modules reduce the duration of the transistor's linear region, minimizing thermal dissipation in the power stage.

• Integrated Active Safety: Features built-in hardware-level protections, including short-circuit detection via desaturation monitoring, undervoltage lockout (UVLO), and Miller clamp functionality to prevent accidental turn-on.

• High Common-Mode Noise Immunity: Exceptional transient immunity ensures that high voltage slopes (dv/dt) generated during rapid switching do not distort the underlying logic signals.

• Compact Footprint Optimization: High integration reduces the count of discrete components required near the power modules, allowing for more compact drive architectures.

• Seamless Drive Adaptation: Specially tuned to align with Lenze's proprietary motor control algorithms, maximizing the torque responsiveness and efficiency of connected motors.

Product Applications

These gate drive modules are essential components in precision motion and power conversion systems:

• Multi-Axis Servo Inverters: Actuating the high-speed power stages of multi-axis drives used in sophisticated robotic systems and handling gantries.

• Variable Frequency Drives: Driving the IGBT blocks of industrial inverters that regulate standard AC induction motors and synchronous motors.

• Regenerative Power Supplies: Managing the power switching loops in energy recovery modules that feed braking energy back into the factory grid.

• Automated Intralogistics Systems: Powering the acceleration stages of high-speed roller conveyors, sorting systems, and automated guided vehicles (AGVs).

• Packaging Machinery: Operating the high-frequency switching lines required for precise electronic cams, flying shears, and sealing jaws.

Important Precautions

To prevent damage to the gate module and maintain operational safety, the following guidelines must be strictly observed:

• Inductance Minimization: Keep the physical connection leads between the gate module and the IGBT pins as short as possible. Long traces create parasitic inductance, which can lead to destructive voltage oscillations.

• Decoupling Capacitor Placement: Ensure that high-quality low-ESR decoupling capacitors are placed directly adjacent to the module’s power supply pins to suppress voltage dips during rapid switching pulses.

• Gate Resistor Calibration: Always use the exact external gate resistor values specified by the Lenze engineering team. Choosing a value too low can cause severe electromagnetic interference, while a value too high will increase thermal losses.

• High-Voltage Discharge Notice: Before performing any inspection or replacement on a drive containing a gate module, disconnect the main power and wait for the internal DC bus capacitors to fully discharge (typically 5 to 10 minutes). Verify zero voltage with a calibrated meter.

• Electrostatic Discharge Control: The internal logic inputs of the module are highly sensitive to static electricity. Technicians must wear grounded anti-static wrist straps and work on conductive mats when handling the unshielded hardware.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

LENZE EVS9325-EK

LENZE EVS9328-ESV004

LENZE GFQUTA100-22

LENZE GST05-2SVCK

LENZE MCA17N41-RS0B0

LENZE MDFKARS090-22

LENZE MDXMA2M080-12

LENZE PM2-500V

LENZE SDSGAXX056-22

LENZE VDE0530

LENZE 4/9916/0714

LENZE EVD533E

LENZE MDSKSRS-036-13

LENZE E94ASHE0134

LENZE EVD4907-E

LENZE EVF8601-E

LENZE EVF8602-E

LENZE EVF8603-E

LENZE EVF8609-E-V005

LENZE EVF9328-EV

LENZE EVS-9223-E

LENZE EVS9321-ETV907

LENZE EVS9327-EP

LENZE EVS9328-ES

LENZE EVS9328-KHV531

LENZE EVS9331-EK

LENZE E94AFHB-001

LENZE EVS9327-ESV004

LENZE EVF8222-E

LENZE MDSKABS071-22

LENZE MDSKAAG056-22

LENZE EVS9328-EI

LENZE E82EV371_2C200

LENZE DRA60-24A

LENZE EPL-10200-XX

LENZE E84AYCECV/S

LENZE EVS9321-EP

LENZE E82EV551-K4C

LENZE E82EV751-K2C200

LENZE RS4-4E

LENZE RS4-2E

LENZE ESMD152L4TXA

LENZE E82EV551-4C200

LENZE E82EV113-4C200

LENZE EVS9324-ESV004

LENZE RS4-4E 520085

LENZE IPRK95/44L.21

LENZE EVS9326ES

LENZE E82EV152K2C

LENZE E82EV302K4C000

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.