EMF2131IB LENZE

EMF2131IB Analog Output Modules

Product  Description：

Lenze analog output modules, primarily utilized within the highly modular Lenze I/O System 1000 or similar decentralized architectures, function as the physical bridge between the digital control logic of a PLC and field-level analog devices. These modules translate digital control values generated by the automation system into precise, continuous electrical signals (either voltage or current). This allows the central controller to dynamically regulate external machinery, enabling smooth adjustments rather than simple binary on/off switching.

Product Parameters

The technical specifications of Lenze analog output modules are engineered for high precision and rapid signal conversion to suit demanding automation tasks:

• Output Channels: Available in various channel densities, most commonly featuring 2, 4, or 8 independent output channels per module slice.

• Signal Ranges: Supports industry-standard analog formats, including voltage outputs (0 to 10V DC, -10V to +10V DC) and current outputs (0 to 20mA, 4 to 20mA).

• Resolution: High-definition digital-to-analog conversion, typically utilizing 12-bit or 16-bit resolution to ensure smooth, granular signal stepping without control jitter.

• Conversion Time: Extremely fast internal processing cycles, often completing conversions in under 1 millisecond per channel to support highly dynamic closed-loop control.

• Load Impedance Limits: Current outputs are generally designed to drive loads up to 500 ohms, while voltage outputs require high-impedance loads, typically strictly above 1 kilo-ohm, to maintain voltage stability.

• Electrical Isolation: Features robust galvanic isolation between the field-side analog outputs and the internal system backplane bus to protect sensitive CPU electronics from field surges.

Product Advantages

Lenze I/O modules are recognized globally for their space-saving architecture and user-friendly engineering:

• Ultra-Compact Footprint: The I/O System 1000 modules feature an extremely narrow width (often exactly 12.5 millimeters), maximizing the available DIN rail space inside crowded control cabinets.

• Tool-Free Wiring: Equipped with direct push-in spring-clamp terminal technology. This allows for fast, secure, and vibration-proof wire connections without the need for screwdrivers, significantly reducing assembly time.

• Seamless Network Integration: Integrates effortlessly into EtherCAT, PROFINET, or CANopen networks via Lenze bus couplers, ensuring perfect data synchronization with Lenze logic and motion controllers.

• Integrated Diagnostics: Channel-specific LED indicators provide immediate visual feedback on module health, power status, and specific faults such as short circuits or broken wire conditions in 4-20mA loops.

• Modular Expandability: The unified backplane design allows modules to be clicked together sequentially, enabling the system to scale effortlessly from small standalone machines to complex, multi-node automated production lines.

Product Applications

These modules are critical for industrial applications requiring continuous, variable regulation:

• Proportional Valve Control: Regulating the precise opening and closing of hydraulic or pneumatic proportional valves in heavy pressing machinery, injection molding, or fluid control systems.

• Drive Speed Reference: Sending variable speed or torque reference signals to legacy or third-party variable frequency drives (VFDs) that lack digital fieldbus network capabilities.

• Temperature Regulation: Providing continuous control reference signals to phase-angle SCR (Silicon Controlled Rectifier) power controllers for industrial baking ovens and plastic extrusion heaters.

• Tension Control Systems: Outputting dynamic braking or winding torque references to maintain consistent web tension in paper rolling, textile manufacturing, or film packaging.

• Dashboard Instrumentation: Driving analog meters, chart recorders, or panel gauges in traditional operator control rooms for real-time visual process monitoring.

Important Precautions

To ensure signal integrity and prevent permanent damage to the module, installation technicians must adhere to strict guidelines:

• Cable Shielding: Analog signals are highly susceptible to electromagnetic interference (EMI). Always use shielded twisted-pair cables for wiring. The shield must be connected to the earth ground at the control cabinet side only to prevent ground loops.

• Spatial Separation: Never route analog output cables in the same wire duct or conduit as AC power lines, motor cables, or variable frequency drive outputs. Maintain a physical separation distance as specified in the hardware manual.

• Load Matching Check: Before energizing the system, verify that the external device's input impedance matches the module's driving capacity. A short circuit on a voltage output or an open circuit on a current output can lead to immediate control failures or hardware strain.

• Backplane Power Management: Ensure that the total power consumption of all connected I/O modules on the rack does not exceed the capacity of the system's bus power supply. Add supplementary power supply modules to the rack if the calculation exceeds the limit.

• Environmental Protection: Install the modules within an IP20-rated (or higher) control cabinet. Ensure ambient operating temperatures remain within the specified limits (typically 0 to 55 degrees Celsius) and provide adequate ventilation to prevent thermal degradation of the internal conversion components.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

LENZE EVS9325-EK

LENZE EVS9328-ESV004

LENZE GFQUTA100-22

LENZE GST05-2SVCK

LENZE MCA17N41-RS0B0

LENZE MDFKARS090-22

LENZE MDXMA2M080-12

LENZE PM2-500V

LENZE SDSGAXX056-22

LENZE VDE0530

LENZE 4/9916/0714

LENZE EVD533E

LENZE MDSKSRS-036-13

LENZE E94ASHE0134

LENZE EVD4907-E

LENZE EVF8601-E

LENZE EVF8602-E

LENZE EVF8603-E

LENZE EVF8609-E-V005

LENZE EVF9328-EV

LENZE EVS-9223-E

LENZE EVS9321-ETV907

LENZE EVS9327-EP

LENZE EVS9328-ES

LENZE EVS9328-KHV531

LENZE EVS9331-EK

LENZE E94AFHB-001

LENZE EVS9327-ESV004

LENZE EVF8222-E

LENZE MDSKABS071-22

LENZE MDSKAAG056-22

LENZE EVS9328-EI

LENZE E82EV371_2C200

LENZE DRA60-24A

LENZE EPL-10200-XX

LENZE E84AYCECV/S

LENZE EVS9321-EP

LENZE E82EV551-K4C

LENZE E82EV751-K2C200

LENZE RS4-4E

LENZE RS4-2E

LENZE ESMD152L4TXA

LENZE E82EV551-4C200

LENZE E82EV113-4C200

LENZE EVS9324-ESV004

LENZE RS4-4E 520085

LENZE IPRK95/44L.21

LENZE EVS9326ES

LENZE E82EV152K2C

LENZE E82EV302K4C000

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.