E82EV152K2B LENZE

E82EV152K2B  analog module

Product  Description：

Lenze Analog Modules, particularly prominent within the Lenze I/O System 1000 and the decentralized g500/8400 drive series, are highly precise signal acquisition and generation components. These modules serve as the analytical sensor and actuator interfaces for advanced motion control and machine automation architectures. They convert real-world continuous variables—such as pressure, speed, temperature, and torque—into digital values for processing by a central controller, or conversely, transform digital controller commands into smooth analog outputs to modulate drive systems.

Product Parameters

The technical baseline of Lenze Analog Modules focuses on precision conversion rates and diverse signal compatibility:

• Signal Configurations: Multi-channel options supporting standard voltage input ranges of 0 to 10V DC and -10 to 10V DC, as well as current loop ranges of 0 to 20mA and 4 to 20mA DC.

• Digital Resolution: High-fidelity processing utilizing 12-bit or 16-bit Analog-to-Digital (A/D) and Digital-to-Analog (D/A) resolution parameters, providing precise quantization of process signals.

• Internal Cycle and Conversion Time: Optimized for high-speed cyclic production, with standard conversion times averaging 2 to 4 milliseconds across all channels, or faster for specialized motion capture.

• Backplane Bus Power Consumption: Extremely low overhead, typically drawing approximately 70mA from the internal 5V or 24V DC backplane communication rail.

• Destruction and Overvoltage Limits: Integrated circuit safety tolerances with a destruction threshold commonly rated up to 30V DC for voltage inputs and 40mA for current loops.

• Galvanic Isolation: Robust dielectric isolation, typically verified at 500V DC between individual channels, the internal backplane bus, and the primary I/O power supply.

Product Advantages

Lenze Analog Modules provide distinctive performance features optimized for machine manufacturing and synchronized multi-axis operations:

• Ultra-Slim and Modular Design: With a slice width often measuring a mere 12.5 mm, these modules optimize cabinet density and minimize physical mounting space.

• Precise Synchronized Touch Probe Inputs: Designed to handle microsecond-level time-stamped signals, ensuring that high-speed position or registration data is transferred to the motion bus without jitter.

• Integrated Parameterizable Filters: Advanced internal data smoothing functions allow engineers to activate software filtering via commissioning tools, effectively suppressing high-frequency interference.

• Intelligent Status and Out-of-Range Indicators: Equipped with multi-colored channel-specific LEDs that flag wire-break scenarios or out-of-range sensor currents instantly, streamlining local hardware diagnostics.

• Tool-Free Assembly and Wiring: Utilizes standard spring-clamp terminal blocks and a clip-on DIN rail design, which eliminates manual screwing and reduces assembly errors during field deployment.

Product Applications

These analog interface modules are crucial for coordinating high-precision machinery and material handling applications:

• Intralogistics and Conveyor Drives: Interfacing with ultrasonic distance sensors to provide smooth acceleration and braking profiles on synchronized sorting lanes.

• Specialized Tension Control: Managing signal tracking from load cells and dancer arms in textile, paper-converting, and winding machinery to maintain uniform material tension.

• Extrusion and Thermal Regulation: Processing real-time feedback from high-temperature RTD or thermocouple transmitters used in plastic molding and food processing equipment.

• Variable Speed Pump and Fan Control: Delivering precise speed references to Lenze 8400 or i500 inverters based on continuous fluid flow or air pressure feedback.

• Test Benches and Dynamometers: Capturing high-resolution torque and mechanical strain data via specialized strain gauge analog input slices.

Important Precautions

To preserve signal fidelity and safeguard internal electronics against premature failure, the following directives must be executed:

• Strict Voltage Limitation: The input electronics are not natively protected against excessive overvoltages. Ensure that the sensor output voltage never exceeds the designated module limit to prevent catastrophic burning of the input circuit.

• Single-Point Shielding Protocols: Always implement high-quality shielded twisted-pair cables for all analog runs. The cable shield must be terminated cleanly at a single designated ground point to avoid circulating ground loops.

• Wiring Segregation Boundaries: Run all low-voltage analog paths through isolated wire trays situated at least 100mm away from three-phase AC motor leads and high-power inverter output cables.

• Configuration of Unused Channels: Unused analog channels can pick up ambient electromagnetic noise and generate false errors. Deactivate unused loops within the programming software or short-circuit the corresponding terminal points.

• Terminal Strip Length Management: When stripping field wires for insertion into the spring-clamp terminals, strictly adhere to the 10mm specification. Exposed bare conductors can result in inter-channel short circuits or contamination-induced faults.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

LENZE EVS9325-EK

LENZE EVS9328-ESV004

LENZE GFQUTA100-22

LENZE GST05-2SVCK

LENZE MCA17N41-RS0B0

LENZE MDFKARS090-22

LENZE MDXMA2M080-12

LENZE PM2-500V

LENZE SDSGAXX056-22

LENZE VDE0530

LENZE 4/9916/0714

LENZE EVD533E

LENZE MDSKSRS-036-13

LENZE E94ASHE0134

LENZE EVD4907-E

LENZE EVF8601-E

LENZE EVF8602-E

LENZE EVF8603-E

LENZE EVF8609-E-V005

LENZE EVF9328-EV

LENZE EVS-9223-E

LENZE EVS9321-ETV907

LENZE EVS9327-EP

LENZE EVS9328-ES

LENZE EVS9328-KHV531

LENZE EVS9331-EK

LENZE E94AFHB-001

LENZE EVS9327-ESV004

LENZE EVF8222-E

LENZE MDSKABS071-22

LENZE MDSKAAG056-22

LENZE EVS9328-EI

LENZE E82EV371_2C200

LENZE DRA60-24A

LENZE EPL-10200-XX

LENZE E84AYCECV/S

LENZE EVS9321-EP

LENZE E82EV551-K4C

LENZE E82EV751-K2C200

LENZE RS4-4E

LENZE RS4-2E

LENZE ESMD152L4TXA

LENZE E82EV551-4C200

LENZE E82EV113-4C200

LENZE EVS9324-ESV004

LENZE RS4-4E 520085

LENZE IPRK95/44L.21

LENZE EVS9326ES

LENZE E82EV152K2C

LENZE E82EV302K4C000

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.