CPS-12N YASKAWA

CPS-12N YASKAWA Servo Controller

Product  Description：

Yaskawa Servo Controllers, primarily known under the Sigma-7 and Sigma-X series, are high-precision electronic devices designed to control the position, velocity, and torque of brushless servo motors. These controllers act as the critical link between the machine's central unit and the physical motor, utilizing sophisticated feedback loops to ensure that mechanical movement matches the digital command with microscopic accuracy.

Product Parameters

The technical performance of Yaskawa Servo Controllers is defined by high-speed processing and robust electrical specifications:

• Power Supply Voltage: Available in multiple ranges including single-phase 100V-115V AC, three-phase 200V-230V AC, and high-voltage 400V-480V AC models.

• Speed Response Frequency: Advanced models feature a speed frequency response of 3.1 kHz or higher, significantly reducing settling time in high-speed applications.

• Encoder Support: Specifically designed to interface with 24-bit high-resolution absolute encoders, providing over 16 million pulses per revolution.

• Communication Interface: Supports high-speed deterministic networks like MECHATROLINK-III, MECHATROLINK-4, and EtherCAT for real-time multi-axis synchronization.

• Control Modes: Capable of switching between Position, Speed, and Torque control modes dynamically through software commands.

• Overload Capacity: Typically supports a peak current output of up to 300 percent of the rated current for short durations to handle rapid acceleration.

Product Advantages

Yaskawa leads the motion control market by offering several distinctive technological benefits:

• Vibration Suppression: Features advanced "Tuning-less" technology and "Vibration Suppression" algorithms that automatically compensate for mechanical resonance and load fluctuations without manual adjustment.

• Extreme Precision: The combination of high-resolution feedback and 3.1 kHz bandwidth allows for ultra-smooth motion and sub-micron positioning accuracy.

• Energy Efficiency: Utilizes high-efficiency power modules and regenerative power handling, reducing total energy consumption and heat generation within the cabinet.

• Safety Integrated: Built-in Functional Safety features such as STO (Safe Torque Off) according to SIL3/PLe standards, ensuring operator safety without the need for redundant external contactors.

• Simplified Setup: The SigmaWin+ software provides automated tuning wizards that analyze the mechanical system's inertia and automatically set the optimal gain parameters.

Product Applications

These controllers are the industry standard for high-performance automation:

• Semiconductor and Electronics: Essential for wafer handling, chip mounters, and high-speed PCB inspection where nanometer-scale precision is required.

• Robotics: Driving the joints of articulated robots and SCARA robots for precise "pick and place" and welding operations.

• Machine Tools: Providing the drive power for high-speed spindles and feed axes in CNC milling, grinding, and EDM machines.

• Packaging and Converting: Synchronizing multiple axes for "flying shears," labeling machines, and rotary cutters that operate at hundreds of cycles per minute.

• Medical Equipment: Used in high-precision laboratory automation, surgical robots, and diagnostic imaging equipment that requires silent and smooth motion.

Important Precautions

To ensure reliable operation and avoid damage to the controller or motor, observe the following:

• Regenerative Resistor Management: If the application involves high-inertia loads or frequent deceleration, ensure an external regenerative resistor is properly installed and configured to prevent "Overvoltage" (A.400) errors.

• Wiring Separation: Keep the motor power cables (U, V, W) and the encoder feedback cables in separate conduits. Cross-talk between power and signal lines is a leading cause of feedback errors and erratic motion.

• Grounding Requirements: The servo controller must be grounded to the same common ground point as the motor and the control cabinet. Use a thick, short wire to minimize high-frequency noise.

• Phase Correctness: When wiring the motor power, never swap the U, V, and W phases in an attempt to reverse the motor direction. Direction must be changed via software parameters; incorrect wiring will cause the motor to "run away" or vibrate violently.

• Environmental Sealing: While the motor may be IP67 rated, the servo controller is typically IP20. It must be installed in a clean, dry, and ventilated control cabinet to prevent internal short circuits from dust or moisture.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

YASKAWA JAMSC-B1065

YASKAWA AK-BX410M

YASKAWA JAPMC-IO2304-T2

YASKAWA JAPMC-CM2302

YASKAWA YPHT31636-1C

YASKAWA CIMR-AA4A0005FAA

YASKAWA JEPMC-PC040

YASKAWA E131457

YASKAWA JUSP-OP02A-1

YASKAWA URX000256

YASKAWA CACR-IR3030CB

YASKAWA CIMR-VMS2030

YASKAWA SGM7J-08A7A6S

YASKAWA SGDH-1EAE

YASKAWA CIMR-MR5A2030

YASKAWA SGDA-04AP

YASKAWA SGM-04A312

YASKAWA JEPMC-PAS3012-E

YASKAWA JEPMC-BU2200-E

YASKAWA 2181F-01

YASKAWA JEPMC-REP2000-E

YASKAWA PS-02

YASKAWA CIMR-VC4A0004BAA

YASKAWA SGDV-7R6A11A

YASKAWA YPHT31624_1D

YASKAWA SGMGV-20ADA61

YASKAWA SGDV180A11A

YASKAWA SGMGV-55ADA61

YASKAWA CIMR-VU2A0020FAA

YASKAWA CIMR-VU2A0012FAA

YASKAWA CIMR-VU2A0006FAA

YASKAWA CIMR-VC4A0011BAA

YASKAWA SGDV-210D11A

YASKAWA CIMR-AT4A0031FAA

YASKAWA SGMGV09ADC61

YASKAWA SGMSH-50ACA61

YASKAWA VZA41P5BAA

YASKAWA PS-02 JACP-317121

YASKAWA SGM-08V312

YASKAWA SGD7S-2R8A20A

YASKAWA SGDV-170D11A020000

YASKAWA SGMRV-37ANA-YR12

YASKAWA SGMRV-13ANA-YR21

YASKAWA CIMR-G7A45P5

YASKAWA SGDS-30A12A

YASKAWA SGMG-1AA2AB

YASKAWA CIMR-G7A4015

YASKAWA YPHT31600-1D

YASKAWA SGDV-1R6A01A

YASKAWA SGM7J-02AFA61-200W

YASKAWA SGD7S-1R6A20A

YASKAWA JEPMC-W6012-A5-E-MIII

YASKAWA SGD7S-330A

YASKAWA SGMAV-04A3A61

YASKAWA 972-ODP10

YASKAWA SGD7S-7R6A

YASKAWA JAMSC-120DDI35400

YASKAWA YPCT31200-1C

YASKAWA SJME-08AMB41

YASKAWA AK-BX410M

YASKAWA SGMSH-15D2A6E-OY

YASKAWA CIMR-JCBA0003BAA

YASKAWA 73600-A0151

YASKAWA CACR-SR15BB1BM

YASKAWA SGMG-09A2AB

YASKAWA PMC-U-MP23S16

YASKAWA CACR-PR10BC3CSY10

YASKAWA JACP-317803

YASKAWA JACP-317800

YASKAWA H3Y-4DC

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.