CIMR-M5N2015 YASKAWA

CIMR-M5N2015 YASKAWA Analog Output Modules

Product  Description：

Yaskawa Analog Output Modules are high-precision interface components designed for the MP series machine controllers. These modules convert digital values processed by the controller’s CPU into continuous analog voltage or current signals. They are primarily used to provide speed or torque references to variable frequency drives, control the positioning of proportional valves, or interface with other industrial instruments that require a variable electrical signal.

Product Parameters

The technical performance of Yaskawa Analog Output Modules is defined by their precision and signal flexibility:

• Output Signal Ranges: Configurable for multiple standard ranges including voltage (-10V to +10V DC, 0V to 10V DC) and current (0mA to 20mA, 4mA to 20mA).

• Digital-to-Analog Resolution: High-resolution conversion typically rated at 16-bit, which provides a fine-grained digital scale (such as -31276 to +31276) for ultra-smooth signal transitions.

• Number of Channels: Available in various densities, commonly featuring 2, 4, or 8 isolated output channels per module.

• Conversion Cycle: Fast update rates, often synchronized with the motion control cycle (e.g., 125 microseconds to 1 millisecond), ensuring high-speed system responsiveness.

• Load Impedance: Voltage outputs typically support loads of 1 kilo-ohm or higher, while current outputs are rated for 600 ohms or less.

• Isolation: Features high-level galvanic isolation between the internal system bus and the external output terminals to protect the controller from field-side electrical noise.

Product Advantages

Yaskawa Analog Output Modules offer several key benefits for high-end motion and process control:

• High Signal Stability: Engineered with low temperature drift and minimal offset error, ensuring that the analog output remains consistent even as the control cabinet temperature fluctuates.

• Smooth Command Generation: The high 16-bit resolution eliminates "stepping" effects in the output signal, which is critical for maintaining smooth motor rotation at very low speeds.

• Integrated Scaling Functions: Many modules allow for digital scaling within the hardware settings, enabling the user to map engineering units (like 0–100 percent) directly to the output signal without complex ladder logic.

• Robust Diagnostic Features: Includes built-in monitoring for current loop open-circuits and output short-circuits, with status flags easily accessible by the controller's CPU for rapid fault detection.

• Synchronization with Motion: Designed to work in perfect harmony with the MECHATROLINK network, ensuring that analog commands are updated exactly when the motion profile requires them.

Product Applications

These modules are essential in systems where variable, non-discrete control is required:

• Speed and Torque Control: Providing precise reference signals to non-networked servo drives or third-party AC inverters.

• Hydraulic and Pneumatic Control: Driving proportional valves to manage the pressure and flow rate in heavy-duty hydraulic presses or injection molding machines.

• Tension Control Systems: Regulating the braking or winding torque in paper, film, and textile processing lines to prevent material breakage.

• Industrial Furnace Control: Managing the power output of thyristor regulators to maintain precise temperature profiles in heat treatment processes.

• Laboratory and Testing Equipment: Controlling variable power supplies or signal generators during automated component testing.

Important Precautions

To ensure accurate signal delivery and prevent hardware damage, the following precautions are vital:

• Shielding and Grounding: Use shielded twisted-pair cables for all analog output lines. The shield should be grounded at a single point (typically the controller side) to avoid ground loops that introduce signal noise.

• External Power Supply: Many analog output modules require an external 24V DC power supply for the output circuitry. Ensure this supply is regulated and separate from high-noise inductive loads like relays or motor starters.

• Current Loop Integrity: When using the 4-20mA current mode, ensure the total loop resistance (including cable and load) does not exceed the module's rated limit (usually 600 ohms), or the output will saturate and become inaccurate.

• Wiring Separation: Never run analog output signal wires in the same conduit or cable tray as high-voltage AC power lines. Maintain a minimum distance of 100mm to 200mm to prevent electromagnetic interference.

• Unused Channel Configuration: For any channels not currently in use, it is recommended to set them to "disabled" in the software configuration to prevent the accumulation of stray electrostatic charge on the output terminals.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

YASKAWA JAMSC-B1065

YASKAWA AK-BX410M

YASKAWA JAPMC-IO2304-T2

YASKAWA JAPMC-CM2302

YASKAWA YPHT31636-1C

YASKAWA CIMR-AA4A0005FAA

YASKAWA JEPMC-PC040

YASKAWA E131457

YASKAWA JUSP-OP02A-1

YASKAWA URX000256

YASKAWA CACR-IR3030CB

YASKAWA CIMR-VMS2030

YASKAWA SGM7J-08A7A6S

YASKAWA SGDH-1EAE

YASKAWA CIMR-MR5A2030

YASKAWA SGDA-04AP

YASKAWA SGM-04A312

YASKAWA JEPMC-PAS3012-E

YASKAWA JEPMC-BU2200-E

YASKAWA 2181F-01

YASKAWA JEPMC-REP2000-E

YASKAWA PS-02

YASKAWA CIMR-VC4A0004BAA

YASKAWA SGDV-7R6A11A

YASKAWA YPHT31624_1D

YASKAWA SGMGV-20ADA61

YASKAWA SGDV180A11A

YASKAWA SGMGV-55ADA61

YASKAWA CIMR-VU2A0020FAA

YASKAWA CIMR-VU2A0012FAA

YASKAWA CIMR-VU2A0006FAA

YASKAWA CIMR-VC4A0011BAA

YASKAWA SGDV-210D11A

YASKAWA CIMR-AT4A0031FAA

YASKAWA SGMGV09ADC61

YASKAWA SGMSH-50ACA61

YASKAWA VZA41P5BAA

YASKAWA PS-02 JACP-317121

YASKAWA SGM-08V312

YASKAWA SGD7S-2R8A20A

YASKAWA SGDV-170D11A020000

YASKAWA SGMRV-37ANA-YR12

YASKAWA SGMRV-13ANA-YR21

YASKAWA CIMR-G7A45P5

YASKAWA SGDS-30A12A

YASKAWA SGMG-1AA2AB

YASKAWA CIMR-G7A4015

YASKAWA YPHT31600-1D

YASKAWA SGDV-1R6A01A

YASKAWA SGM7J-02AFA61-200W

YASKAWA SGD7S-1R6A20A

YASKAWA JEPMC-W6012-A5-E-MIII

YASKAWA SGD7S-330A

YASKAWA SGMAV-04A3A61

YASKAWA 972-ODP10

YASKAWA SGD7S-7R6A

YASKAWA JAMSC-120DDI35400

YASKAWA YPCT31200-1C

YASKAWA SJME-08AMB41

YASKAWA AK-BX410M

YASKAWA SGMSH-15D2A6E-OY

YASKAWA CIMR-JCBA0003BAA

YASKAWA 73600-A0151

YASKAWA CACR-SR15BB1BM

YASKAWA SGMG-09A2AB

YASKAWA PMC-U-MP23S16

YASKAWA CACR-PR10BC3CSY10

YASKAWA JACP-317803

YASKAWA JACP-317800

YASKAWA H3Y-4DC

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.