C6920-1123-0050 BECKHOFF

C6920-1123-0050 BECKHOFF Output Module

Product  Description：

Beckhoff Output Modules, particularly within the EtherCAT Terminal (EL series) and Bus Terminal (KL series) product lines, are high-performance electronic components designed to transmit control signals from a central automation controller to field-side actuators. These modules receive digital or analog commands via a high-speed fieldbus system and convert them into the appropriate electrical power or signals required to drive devices such as solenoids, contactors, motor starters, and indicator lights.

Product Parameters

The technical characteristics of Beckhoff Output Modules are defined by high-density signal distribution, fast response times, and flexible electrical ratings:

• Channel Density: Highly scalable configurations available in 2, 4, 8, or 16 channels within a compact 12mm housing to maximize control cabinet space.

• Signal Types: Offered in digital configurations (e.g., 24V DC, 120-230V AC) and analog configurations (e.g., 0-10V, 4-20mA, bipolar minus 10V to plus 10V).

• Switching Mechanisms: Available with transistor outputs for high-frequency switching or relay contacts for handling higher current loads and potential-free isolation.

• Rated Load Current: Transistor outputs typically deliver 0.5A to 2A per channel, while specialized power terminals can handle up to 16A.

• Fieldbus Cycle Time: Designed for ultra-fast synchronization via EtherCAT, supporting processing updates down to the microsecond level.

• Connection Technology: Utilizes a direct insertion push-in cage clamp system for toolless connection of solid or ferruled wires.

Product Advantages

Beckhoff Output Modules provide substantial operational benefits due to their modular design and advanced bus communication:

• EtherCAT High-Speed Performance: Utilizing the EtherCAT protocol, these modules enable real-time deterministic synchronization, making them ideal for high-speed packaging and motion application control.

• Space-Saving Modular Architecture: The slim physical footprint allows thousands of output points to be organized within a single control panel, reducing hardware overhead.

• Distributed Clocks Functionality: Many modules support precise synchronization through the EtherCAT Distributed Clocks system, ensuring outputs switch simultaneously across different physical racks with sub-microsecond accuracy.

• Comprehensive Diagnostics: Built-in electronic monitoring allows for advanced status tracking, including short-circuit detection, open-circuit identification, and thermal overload reporting directly to the controller.

• Flexible Mix-and-Match Customization: The slice-type design allows users to combine digital, analog, and safety-rated outputs on the same physical terminal rail without any restrictions.

Product Applications

These output modules are widely used in modern automated systems requiring high-speed execution and dense component layout:

• Manufacturing and Assembly Lines: Triggering pneumatic valves, sorters, and robotic tooling fixtures in high-throughput production environments.

• Packaging and Sorting Equipment: Controlling high-speed reject gates, sealing elements, and glue applicators where microsecond timing changes affect product quality.

• Wind Power Generation: Actuating pitch-control mechanisms, hydraulic brakes, and cooling fans based on changing environmental data.

• Material Handling and Logistics: Powering the drives, diverters, and indicator lamps found along extensive automated conveyor networks.

• Test Benches and Laboratory Automation: Delivering high-precision analog control signals to test actuators and variable simulation hardware.

Important Precautions

To preserve equipment integrity and ensure safe operation on the factory floor, the following guidelines must be followed:

• Potential Group Separation: Pay close attention to the power supply routing across the internal power contacts. High-voltage AC modules and low-voltage DC modules must be separated using isolated feed terminals to prevent voltage bleeding.

• Inductive Load Protection: When driving inductive loads such as heavy-duty solenoids or mechanical relays with digital transistor outputs, ensure the module has integrated freewheeling diodes or install external surge protection to absorb back-EMF spikes.

• Total Current Limitations: Do not exceed the maximum total current rating of the entire terminal block. While individual channels may operate within limits, the combined current flowing through the terminal power contacts must not exceed the specified maximum.

• Correct Wire Stripping: Ensure wires are stripped to the exact length specified by the manufacturer before inserting them into the push-in connection. Under-stripping leads to poor electrical contact, while over-stripping leaves exposed conductors that cause short circuits.

• Power-Off Configuration: Always switch off the fieldbus power and the field-side peripheral power before attaching, removing, or changing the wiring of an output module to prevent accidental signal triggers or electrical arcing.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

BECKHOFF EL9410

BECKHOFF EL6751

BECKHOFF EL4132 

BECKHOFF EL6731

BECKHOFF EL6910

BECKHOFF EL2904

BECKHOFF EL1904

BECKHOFF EK1122

BECKHOFF EL6080

BECKHOFF EL4008

BECKHOFF AX2003-AS

BECKHOFF AX2006-AS

BECKHOFF KL1501

BECKHOFF CX1100-0014

BECKHOFF CU2008

BECKHOFF EL3102

BECKHOFF BC8150

BECKHOFF AS1020-0120

BECKHOFF EL2828

BECKHOFF EL1088

BECKHOFF EL2088

BECKHOFF EL3122

BECKHOFF EL5101

BECKHOFF EL6002

BECKHOFF EK1110

BECKHOFF BK1120

BECKHOFF CX1100-0004

BECKHOFF CX1020-0111

BECKHOFF CX1020-N000

BECKHOFF CX1020-N010

BECKHOFF KL1404

BECKHOFF BK3150

BECKHOFF KL9010

BECKHOFF CX1900-0022

BECKHOFF EL6070-0033

BECKHOFF EL3068

BECKHOFF EL1809

BECKHOFF EL2809

BECKHOFF AM3043-1E41-0000

BECKHOFF CP6533-00010021

BECKHOFF CP6203-0001-0020

BECKHOFF C3620-0010

BECKHOFF CP7201-1000-0000

BECKHOFF CP6901-0001-0000

BECKHOFF CP6933-0001-0000

BECKHOFF CP7032-0001

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.