3UF7932-0BA00-0 SIEMENS Multi-Function Processor Module
Item NO.:
3UF7932-0BA00-0 SIEMENSGoods Stock:
3Payment:
T/TProduct Origin:
GermanyColor:
NewShipping Port:
ChinaLead Time:
2-3daysWeight:
0.55KGBrand:
SIEMENS3UF7932-0BA00-0 SIEMENS Multi-Function Processor Module
Product Description:
The SIEMENS Multi-Function Processor Module is a highly integrated, all-in-one industrial control core designed to break the boundary between traditional dedicated PLC processors and specialized functional modules. Unlike standard general-purpose processor modules that only handle basic logic and data processing, it integrates multiple independent functional computing units on a single hardware platform, supporting simultaneous execution of standard logic control, high-precision motion control, advanced process regulation, safety-related operation and edge data processing tasks without requiring extra dedicated functional modules. As a key product in SIEMENS' next-generation distributed automation architecture, it can be directly mounted on SIMATIC S7-1500 backplane stations or distributed ET 200SP/ET 200MP I/O racks, and is fully compatible with the TIA Portal ecosystem to deliver a unified engineering experience for all its integrated functions. It is purpose-built for modern compact, highly integrated automation systems that demand multiple complex control capabilities in a limited hardware footprint.
The SIEMENS Multi-Function Processor Module portfolio covers multiple performance tiers to match varying levels of integrated control complexity. Mainstream high-end variants integrate multi-core industrial processing chips, providing up to several megabytes of combined work memory that can be flexibly partitioned for logic, motion and data processing tasks, with a minimum logic instruction execution time as low as 0.05 microseconds. They support up to 64 synchronized motion axes with a position control cycle time down to 125 microseconds, and integrate native closed-loop process control function blocks for temperature, pressure and flow regulation that can run independently without extra external controllers. Most models carry a dedicated on-board FPGA for high-speed signal processing, supporting up to 4 independent high-speed counter channels with maximum input frequency up to 1 MHz, and native integrated PROFINET, OPC UA and MQTT interfaces for direct edge-level data transmission to upper-level IT systems. Premium safety-certified variants integrate fail-safe processing cores that meet PL e functional safety standards, allowing safety-related control logic to run on the same module alongside standard production control tasks. The full product line carries IP20 protection rating for cabinet installation, supports continuous stable operation across an extended ambient temperature range from -25 °C to +60 °C, and complies with global industrial EMC, CE and UL safety standards.
The SIEMENS Multi-Function Processor Module series delivers unique integrated strengths that cannot be achieved by combining separate dedicated modules. Its highly integrated single-hardware design eliminates the need for multiple discrete processor, motion control, process control and communication modules, drastically reducing the total number of hardware components and occupied control cabinet space, cutting system hardware investment and installation workload by more than 30%. The shared high-speed backplane architecture between different functional units on the same module eliminates the communication delay between separate dedicated modules, ensuring near-zero latency data synchronization between logic control, motion execution and process regulation, which significantly improves the overall dynamic performance of the automation system. The unified TIA Portal engineering environment allows engineers to program, configure, debug and diagnose all control functions on a single platform, removing the need to learn multiple sets of software tools for different dedicated modules and greatly shortening new project engineering cycles. The reduced number of discrete system components effectively lowers the total fault points of the entire automation system, improving overall system reliability and reducing long-term maintenance complexity. It also supports flexible function partition and resource allocation, allowing users to dynamically adjust the proportion of computing resources assigned to logic, motion or data processing tasks according to actual production requirements, adapting to changing production demands without replacing hardware.
Strict standardized operation protocols must be followed throughout the entire lifecycle of the SIEMENS Multi-Function Processor Module to avoid performance degradation, hardware damage or unplanned production downtime. Technicians must fully disconnect all connected power supplies and confirm no residual voltage remains on the system backplane before performing any installation, wiring or disassembly operations, to prevent electric shock, electrostatic damage to sensitive multi-core processing circuits or accidental triggering of uncontrolled equipment movement. Users must carefully plan and allocate the module's computing resources during the engineering design phase, to avoid overloading the processor with too many concurrent high-priority tasks that may exceed the maximum allowed cycle time and break the deterministic performance of the control system. Never hot-swap the energized multi-function processor module, as this will cause the simultaneous interruption of all integrated control tasks including logic, motion and safety functions, leading to unexpected full-system shutdown. All firmware upgrades must use official SIEMENS certified firmware packages, and the operation must be carried out strictly following official step-by-step procedures, as any update interruption may render the multi-core integrated system unrecoverable. The module must be installed in a properly grounded industrial control cabinet with sufficient heat dissipation clearance, as the high density of integrated computing components generates more heat than standard processors, and poor heat dissipation may lead to automatic performance throttling or over-temperature protection shutdown. All installation, configuration and maintenance operations must be completed exclusively by professionally trained certified industrial automation technicians who are fully familiar with multi-core integrated industrial control system specifications.
SIEMENS Multi-Function Processor Modules are widely deployed in highly integrated modern automation scenarios that demand multiple complex control capabilities. They serve as the all-in-one control core for compact high-speed processing machinery including injection molding machines, 3D printing equipment and small CNC machine tools, integrating logic control, multi-axis motion control and temperature process regulation on a single hardware platform to minimize machine footprint. They are extensively used in new energy production equipment such as lithium battery winding machines and photovoltaic cell sorting machines, delivering synchronized high-speed motion control, high-precision process parameter regulation and real-time production data collection in one integrated system to meet strict high-end manufacturing requirements. They are the ideal control solution for modular standardized production skids in the pharmaceutical and food & beverage industries, where limited cabinet space requires all process control, safety interlock and data transmission functions to run on a single compact module. In intelligent edge automation scenarios, they perform as local edge controllers, integrating production control, on-site data preprocessing and cloud communication functions to reduce unnecessary data transmission volume between the production site and upper-level IT systems. For small and medium-sized intelligent logistics systems, they combine conveyor logic control, multi-axis robot motion coordination and barcode data processing functions, simplifying the system architecture and reducing overall project cost.
The structure and details of the product:

Our services:
Shipping Port: China
Payment: Bank of Chicago, Bank of Singapore
Express cooperation: fedex, DHL, UPS and your express account
Service: Professional Sales provides 24 hours /7 days online service
Warranty: one year
Please make an inquiry for more models:
SIEMENS 6ES7141-54H00-0BA0
SIEMENS 6ES7143-5AH00-0BA0
SIEMENS 6ES7144-5KD00-0BA0
SIEMENS 6ES7157-1AB00-0AB0
SIEMENS 6ES5928-3UB21
SIEMENS 6EP1333-2BA20
SIEMENS 6SE7033-2EG84-1BH0
SIEMENS PXC50.D
SIEMENS 6SE7017-8FB61
SIEMENS 6SE7022-2FC61
SIEMENS 6SE7021-1FB61
SIEMENS 3VL3725-2AA36-0AA0
SIEMENS 6XV1870-3QE50
SIEMENS 6ES7231-7PD22-0XA8
SIEMENS 6GK7443-1GX30-0XE0
SIEMENS 6ES7400-1JA01-0AA0
SIEMENS 6ES7405-0KA02-0AA0
SIEMENS 3TF6844-8CM7
SIEMENS 3RH1921-1FA22
SIEMENS 3RB1066-2KG0
SIEMENS 6ES7214-1BE30-0XB0
SIEMENS 6ES7232-4HB30-0XB0
SIEMENS 6ES7222-1HF32-0XB0
SIEMENS 6SE7038-6EK84-1JC2
SIEMENS 1FK6081-6AF71-1ZZ9
SIEMENS TX12.OPEN
SIEMENS 6AV6647-0AD11-3AX0
SIEMENS 6SN2132-0AA11-1BA1
SIEMENS 6SN2155-0AA10-1BA1
SIEMENS 6GK5602-0BA00-2AA3
SIEMENS 6GK5734-1FX00-0AB0
SIEMENS 6GK74435DX050XE0
SIEMENS 6GK7443-1EX30-0XE0
SIEMENS 3ZX1012-ORT02-1AA1
SIEMENS 6SL3244-0BB12-1PA1
SIEMENS 3RH1921-1HA31
SIEMENS 3RV1021-1BA10
SIEMENS 3RH1911-1HA12
SIEMENS 3RV1021-1AA10
SIEMENS 3NA3022
SIEMENS 3NA7822
SIEMENS 6ES7952-1AK00-0AA0
SIEMENS 6ES7952-1AM00-0AA0
SIEMENS 6ES7331-7PF01-0AB0
SIEMENS QLCDM024DCBAN
JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.
This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com
JUSTWELL PTE. LTD
Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.
