33.532-E LENZE

33.532-E LENZE Central unit

Product  Description：

Lenze Central Units, primarily represented by the c300, c430, c520, and 3200 C controller series, are high-performance industrial computing brains designed for automated machine control. These central processing modules integrate robust logic processing with highly deterministic motion control capabilities. Built to act as the master controller within a mechatronic subsystem, they synchronize variable frequency drives, servo systems, and distributed I/O across complex multi-axis machinery.

Product Parameters

The technical composition of a Lenze Central Unit focuses on scalable computational power and microsecond-level synchronization:

• Processor Architectures: Equipped with power-optimized ARM Cortex (A8/A9) processors running at 800 MHz for basic motion, up to high-performance Intel Atom multi-core processors reaching 1.91 GHz for complex multi-axis robotics.

• Real-Time Operating Systems: Operates on deterministic, real-time industrial platforms including RT Linux or Windows Embedded Compact 7, ensuring precise task scheduling.

• Multi-Axis Synchronization Cycle: Highly optimized system bus handling capable of processing complex motion control tasks and fieldbus cycles as fast as 125 microseconds to 1 millisecond.

• Communication Protocols: Features standard onboard EtherCAT Master capabilities alongside flexible configurations for PROFINET IO-Device, EtherCAT Slave, CANopen, and Ethernet TCP/IP.

• Interface Connectivity: Built-in dual-port Ethernet switches, RS232/RS422/RS485 serial ports, and dedicated USB slots for external memory or peripheral device connections.

• Environmental Resilience: Rated for a wide operating temperature range from 0°C up to 60°C under natural convection conditions, with standard IP20 housing protection.

Product Advantages

Lenze Central Units deliver unique competitive advantages by balancing high computational power with maintenance-free hardware architecture:

• Code Portability and Scalability: The cross-platform software architecture allows developers to switch between different controller hardware tiers without any loss of application code or configuration files.

• Maintenance-Free Design: Utilizes an innovative battery-free and fanless hardware topology, relying on internal non-volatile memory for data retention, which eliminates common mechanical and component wear points.

• Pre-Programmed Motion Templates: Seamlessly integrates with the Lenze FAST Application Software toolbox, allowing engineers to deploy complex kinematics like electronic camming, flying shears, and delta robotics via ready-made functional modules.

• Unified Engineering Tools: Programmed using Lenze PLC Designer, which is based on the industry-standard IEC 61131-3 (CoDeSys 3) environment, ensuring a familiar development process and reducing engineering time.

• Seamless IT/OT Connectivity: Built-in support for standardized open interfaces like OPC UA allows the central unit to feed real-time machine analytics directly to edge gateways and enterprise cloud solutions.

Product Applications

These centralized controllers are optimized for machinery where high-speed motion must blend seamlessly with process logic:

• Packaging Machinery: Governing high-speed horizontal form-fill-seal (HFFS) systems, continuous rotary cutters, and top-loading multi-axis cartoners.

• Robotic Handling Systems: Calculating real-time inverse kinematics for delta picker robots, SCARA arms, and high-speed gantry palletizers.

• Converting and Textile Equipment: Managing synchronized multi-axis web tension control, winding systems, and precision electronic gearboxes.

• Automated Material Handling: Controlling storage and retrieval machines, high-speed sorting conveyors, and automated guided vehicle (AGV) scheduling hubs.

• Component Manufacturing Assembly: Driving high-frequency pick-and-place units, automatic screw insertion cells, and multi-station indexing tables.

Important Precautions

To preserve system reliability and protect the internal microprocessor circuits, the following instructions must be observed:

• Power Conditioning: Always run the central unit on a stable, regulated 24V DC power supply line. Isolate the controller power from the high-inductive lines of motors and brake contactors to prevent voltage sags from causing a CPU reset.

• Shielding and Fieldbus Grounding: Use only officially certified, shielded twisted-pair cables for the EtherCAT and communication networks. Ground the cable shields securely at the panel entry point to prevent ambient EMI from corrupting real-time network packets.

• Slot Expansion Limits: When extending the local control bus with side-mounted I/O or communication option modules, ensure that the total current draw does not exceed the maximum backplane bus power capacity specified for the central unit.

• Mounting Clearances: The unit must be mounted vertically on a backplane panel as dictated by the technical manual. Maintain a minimum clearance of 50mm above and below the ventilation slots to ensure adequate natural air convection.

• Data Backup Discipline: Before initiating firmware updates via the engineering software or introducing new application code, always create an identical system backup onto an external SD card to prevent machine state loss in the event of an update interruption.

The structure and details of the product：

Our services：

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Warranty: one year

Please make an inquiry for more models：

LENZE EVS9325-EK

LENZE EVS9328-ESV004

LENZE GFQUTA100-22

LENZE GST05-2SVCK

LENZE MCA17N41-RS0B0

LENZE MDFKARS090-22

LENZE MDXMA2M080-12

LENZE PM2-500V

LENZE SDSGAXX056-22

LENZE VDE0530

LENZE 4/9916/0714

LENZE EVD533E

LENZE MDSKSRS-036-13

LENZE E94ASHE0134

LENZE EVD4907-E

LENZE EVF8601-E

LENZE EVF8602-E

LENZE EVF8603-E

LENZE EVF8609-E-V005

LENZE EVF9328-EV

LENZE EVS-9223-E

LENZE EVS9321-ETV907

LENZE EVS9327-EP

LENZE EVS9328-ES

LENZE EVS9328-KHV531

LENZE EVS9331-EK

LENZE E94AFHB-001

LENZE EVS9327-ESV004

LENZE EVF8222-E

LENZE MDSKABS071-22

LENZE MDSKAAG056-22

LENZE EVS9328-EI

LENZE E82EV371_2C200

LENZE DRA60-24A

LENZE EPL-10200-XX

LENZE E84AYCECV/S

LENZE EVS9321-EP

LENZE E82EV551-K4C

LENZE E82EV751-K2C200

LENZE RS4-4E

LENZE RS4-2E

LENZE ESMD152L4TXA

LENZE E82EV551-4C200

LENZE E82EV113-4C200

LENZE EVS9324-ESV004

LENZE RS4-4E 520085

LENZE IPRK95/44L.21

LENZE EVS9326ES

LENZE E82EV152K2C

LENZE E82EV302K4C000

JUSTWELL PTE. LTD. sells new and discontinued products, and purchases such specialty products through independent channels. JUSTWELL PTE. LTD. is not an authorized distributor, distributor, or representative of the featured products on this website. All product names/images, trademarks, brands, and logos used on this website are the property of their respective owners. Product descriptions, descriptions, or sales with these name images, trademarks, brands, and logos are for identification purposes only and do not imply any association or authorization with any rights holders.

This article is from the official website of JUSTWELL PTE. LTD. If reprinted, please attach this link: https://justwellltd.com .com

JUSTWELL PTE. LTD

Our main products include DCS control system spare parts, PLC system spare parts, and robot system spare parts. Our advantageous brands include Allen Bradley, Bently Nevada, ABB, HIMA, Reliance, Bender, National Instruments, Emerson Ovation, Honeywell, Siemens, Allen Bradley, ICS Triplex, FOXBORO, Schneider, GE Fanuc, Motorola, HIMA, Prosoft, and other imported industrial components. Our main products serve a wide range of electronic, metallurgical, chemical, and power plants Industries such as steel mills, rubber, cement, machinery and equipment, and construction.